微细金属管制造技术现状与研究进展*

doi:10.16731/j.cnki.1671-3133.2024.01.021

现代制造工程 ›› 2024, Vol. 520 ›› Issue (1): 142-150.doi: 10.16731/j.cnki.1671-3133.2024.01.021

微细金属管制造技术现状与研究进展^*

王文凯, 明平美, 闫亮, 张新民, 李欣潮, 张亚赛, 牛屾

河南理工大学机械与动力工程学院,焦作 454000

收稿日期:2023-03-20 出版日期:2024-01-18 发布日期:2024-05-29
通讯作者: 明平美,教授,博士生导师,主要研究方向为精密与特种加工。闫亮,讲师,硕士生导师,主要研究方向为精密与特种加工。E-mail:mingpingmei@163.com;yanliang@hpu.edu.cn
作者简介:王文凯,硕士研究生,主要研究方向为微细与特种加工技术。
基金资助:
^*中国博士后科学基金项目(2020M682289);河南省重点研发与推广专项项目(232102221020,222102220001);河南理工大学博士基金项目(B2013-031)

Current status and research progress of metal micro-tube manufacturing technology

WANG Wenkai, MING Pingmei, YAN Liang, ZHANG Xinmin, LI Xinchao, ZHANG Yasai, NIU Shen

School of Mechanical and Power Engineering,Henan Polytechnic University,Jiaozuo 454000,China

Received:2023-03-20 Online:2024-01-18 Published:2024-05-29

摘要/Abstract

摘要： 微细金属管具有微环境下的微通道封闭、定向导向、稳流导流等功能,被广泛应用于医疗、电工电子、传热、光学等领域。受加工工具小型化、尺寸效应对材料性能和摩擦行为的改变等限制,微细金属管的制备极具挑战性。总结了微细金属管常用制备技术的制备原理、特点、制造能力以及优缺点,包括热挤压成形、冷拔成形、无模拉拔成形以及电铸成形,并对微细金属管制造技术的未来发展趋势与研究重点进行了展望。

关键词: 微细金属管, 制备方法, 无模拉拔成形, 电铸成形

Abstract: Metal micro-tube has the functions of micro-channel closure,directional guidance,steadying and guiding flow etc.,which is widely used in medicine,electrical and electronics,heat transfer,optics and other fields.The preparation of metal micro-tubes is very challenging due to the limitations of the miniaturization of tools and changes in material properties and friction behavior due to size effect.The process principles,manufacturing characteristics,forming capabilities,advantages and disadvantages of the commonly used manufacturing technologies for metal micro-tubes are summarized,including hot extrusion forming,cold drawing forming,dieless drawing forming and electroforming forming.Finally,the future development trends and research focuses of metal micro-tube manufacturing technology are prospected.

Key words: metal micro-tube, manufacturing technologies, dieless drawing forming, electroforming forming

中图分类号:

TG356
TQ153

王文凯, 明平美, 闫亮, 张新民, 李欣潮, 张亚赛, 牛屾. 微细金属管制造技术现状与研究进展^*[J]. 现代制造工程, 2024, 520(1): 142-150.

WANG Wenkai, MING Pingmei, YAN Liang, ZHANG Xinmin, LI Xinchao, ZHANG Yasai, NIU Shen. Current status and research progress of metal micro-tube manufacturing technology[J]. Modern Manufacturing Engineering, 2024, 520(1): 142-150.

参考文献

[1] HARTL C.Review on advances in metal micro-tube forming[J].Metals,2019,9(5):542.
[2] KOREI N,SOLOUK A,NAZARPAK M H,et al.A review on design characteristics and fabrication methods of metallic cardiovascular stents[J].Materials Today Communications,2022:103467.
[3] 方刚,闫凯民,曾攀,等.镁合金微细管热挤压-冷拉拔工艺[J].塑性工程学报,2013,20(5):11-15.
[4] LIU Y,LU B,CAI Z.Recent progress on Mg-and Zn-based alloys for biodegradable vascular stent applications[J].Journal of Nanomaterials,2019(6):1-16.
[5] AMANI S,FARAJI G.Processing and properties of biodegradable magnesium microtubes for using as vascular stents:a brief review[J].Metals and Materials International,2019,25(5):1341-1359.
[6] GUO K,LIU M,WANG J,et al.Microstructure and texture evolution of fine-grained Mg-Zn-Y-Nd alloy micro-tubes for biodegradable vascular stents processed by hot extrusion and rapid cooling[J].Journal of Magnesium and Alloys,2020,8(3):873-882.
[7] AMANI S,FARAJI G,MEHRABADI H K,et al.A combined method for producing high strength and ductility magnesium microtubes for biodegradable vascular stents application[J].Journal of Alloys and Compounds,2017,723:467-476.
[8] AMANI S,FARAJI G,MEHRABADI H K,et al.Manufac-turing and mechanical characterization of Mg-4Y-2Nd-0.4Zr-0.25La magnesium microtubes by combined severe plastic deformation process for biodegradable vascular stents[J].Proceedings of the Institution of Mechanical Engineers,Part B:Journal of Engineering Manufacture,2019,233(4):1196-1205.
[9] TANG D,ZHANG Q,LI D Y,et al.A physical simulation of longitudinal seam welding in micro channel tube extrusion[J].Journal of Materials Processing Technology,2014,214(11):2777-2783.
[10] 伍波,李龙,周德敬.平行流换热器用铝合金多孔微通道扁管评述[J].轻合金加工技术,2016,44(2):9-15.
[11] 曾翠婷.换热器用微通道铝扁管市场前景及生产技术浅析[J].有色金属加工,2020,49(5):6-8.
[12] 刘元文,陈莉,宋宝韫.汽车空调平行流多孔管的连续挤压技术[J].锻压技术,2007(1):53-54.
[13] LEE J M,KIM B M,KANG C G.Effects of chamber shapes of porthole die on elastic deformation and extrusion process in condenser tube extrusion[J].Materials & Design,2005,26(4):327-336.
[14] LEE S H,LEE J M,JO H H,et al.Process analysis and die design in 12 cells condenser tube extrusion of Al3003[J].Journal of Materials Processing Technology,2008,201(1/2/3):53-59.
[15] TANG D,FANG W,FAN X,et al.Effect of die design in microchannel tube extrusion[J].Procedia Engineering,2014,81:628-633.
[16] CHO H,HWANG D Y,LEE B S,et al.Fabrication of micro condenser tube through direct extrusion[J].Journal of Materials Processing Technology,2007,187:645-648.
[17] YOSHIDA K,YOKOMIZO D,KOMATSU T.Production of special tubes with a variety cross-sectional shapes by bunch drawing and fluid-mandrel drawing[J].Key Engineering Materials,2014,622-623:731-738.
[18] TANG Y,OU D S,WAN Z P,et al.Influence of drawing process parameters on forming of micro copper tube with straight grooves[J].Transactions of Nonferrous Metals Society of China,2011,21(10):2264-2269.
[19] YOSHIDA K,KOIWA A.Cold drawing of magnesium alloy tubes for medical[J].Journal of Solid Mechanics and Materials Engineering,2011,5(12):1071-1078.
[20] WANG J F,ZHOU Y F,YANG Z Y,et al.Processing and properties of magnesium alloy micro-tubes for biodegradable vascular stents[J].Materials Science and Engineering:C,2018,90:504-513.
[21] FURUSHIMA T,MANABE K.Superplastic micro-tubes fabricated by dieless drawing processes[M]//Giuliano G.Superplastic Forming of Advanced Metallic Materials.Cambridge:Woodhead Publishing,2011:327-360.
[22] HWANG Y,KUO T.Dieless drawing of stainless steel tubes[J].The International Journal of Advanced Manufacturing Technology,2013,68(5/6/7/8):1311-1316.
[23] FURUSHIMA T,IMAGAWA Y,FURUSAWA S,et al.Development of rotary laser dieless drawing apparatus for metal microtubes[J].Key Engineering Materials,2014,626:372-376.
[24] FURUSHIMA T,MANABE K.Large reduction dieless mandrel drawing of magnesium alloy micro-tubes[J].CIRP Annals,2018,67(1):309-312.
[25] BECKER E W,EHRFELD W,HAGMANN P,et al.Fabrication of microstructures with high aspect ratios and great structural heights by synchrotron radiation lithography,galvanoforming,and plastic moulding (LIGA process)[J].Microelectronic Engineering,1986,4(1):35-56.
[26] 邓扬明.基于准LIGA技术制作微齿轮的研究[D].北京:北京工业大学,2005.
[27] 赵广宏,薛彦鹏,汪郁东,等.MEMS技术中的电镀工艺及其应用[J].遥测遥控,2022,43(1):29-40.
[28] WANG Y,YI F,ZHANG T,et al.Design and property study of micro-slot optics[J].Optics Communications,2017,386:14-21.
[29] DAVIS S P,MARTANTO W,ALLEN M G,et al.Hollow metal microneedles for insulin delivery to diabetic rats[J].IEEE Transactions on Biomedical Engineering,2005,52(5):909-915.
[30] PÉRENNÈS F,MARMIROLI B,MATTEUCCI M,et al.Sharp beveled tip hollow microneedle arrays fabricated by LIGA and 3D soft lithography with polyvinyl alcohol[J].Journal of Micromechanics and Microengineering,2006,16(3):473-479.
[31] 明平美,李欣潮,张新民,等.电化学三维微沉积技术及其研究进展[J].中国科学:技术科学,2018,48(4):347-359.
[32] KIM K,PARK D S,LU H M,et al.A tapered hollow metallic microneedle array using backside exposure of SU-8[J].Journal of Micromechanics and Microengineering,2004,14(4):597-603.
[33] GRIFFITHS S K,NILSON R H,TING A,et al.Modeling electrodeposition for LIGA microdevice fabrication[J].Microsystem Technologies:Sensors,Actuators,Systems Integration,1998,4(2):98-101.
[34] ZHANG H,ZHANG N,FANG F.Investigation of mass transfer inside micro structures and its effect on replication accuracy in precision micro electroforming[J].International Journal of Machine Tools and Manufacture,2021,165:103717.
[35] LIU G,HUANG X,XIONG Y,et al.Fabricating HARMS by using megasonic assisted electroforming[J].Microsystem Technologies,2008,14(9/10/11):1223-1226.
[36] MING P M,ZHU D,HU Y Y,et al.Micro-electroforming under periodic vacuum-degassing and temperature-gradient conditions[J].Vacuum,2009,83(9):1191-1199.
[37] COHEN A,FRODIS U,TSENG F,et al.EFAB:low-cost automated electrochemical batch fabrication of arbitrary 3D microstructures[C]//SMITH J H, KARAM J M. Micromachining and Microfabrication Process Technology V.[S.l.]:SPIE,1999,3874:236-247.
[38] COHEN A,CHEN R,FRODIS U,et al.Microscale metal additive manufacturing of multi-component medical devices[J].Rapid Prototyping Journal,2010,16(3):209-215.
[39] 明平美,王伟,李欣潮,等.一种射流电沉积喷头及其用于制造无缝金属管的方法:201910761689.2[P].2019-08-19.
[40] ZHAN X,CAO Q D,TRIEU K,et al.Microstructure and mechanical properties of copper microtubes fabricated via the electroforming process[J].Journal of Materials Engineering and Performance,2020,29(3):1741-1750.
[41] CHATZIPIRPIRIDIS G,ERGENEMAN O,POKKI J,et al.Electroforming of implantable tubular magnetic microrobots for wireless ophthalmologic applications[J].Advanced Healthcare Materials,2015,4(2):209-214.
[42] 王日鑫,明平美,闫亮,等.一种用于脱模的真空夹具:202020904144.0[P].2020-05-26.
[43] 明平美,王日鑫,闫亮,等.一种用于电铸大长径比薄壁无缝金属管的脱模装置与方法:202010094943.0[P].2020-02-17.
[44] 小田德治.Electrocast tube producing method,electrocast tube,and thin wire material for production of electrocast tubes:WO2005090645A1[P].2005-09-29.
[45] 佐々木浩二.エンドレスベルトの製造装置及びその製造方法:WO2006213960A1[P].2006-08-17.
[46] 工藤譲.無端状金属薄膜の製造方法:JP2012058644A[P].2012-03-22.
[47] 明平美,李宗彬,王日鑫,等.一种用于电铸薄壁金属定影管的脱模装置与方法:202110741229.0[P].2021-07-01.
[48] 詹晓非.微型铜管电铸成型工艺及性能研究[D].南京:南京理工大学,2020.
[49] MORAVEJ M,MANTOVANI D.Biodegradable metals for cardiovascular stent application:interests and new opportunities[J].International Journal of Molecular Sciences,2011,12(7):4250-4270.
[50] 石户谷笃.Method for producing ferrule for optical fiber connector by electroforming:JP2002241982A[P].2002-08-28.
[51] MUKOUDA T.Method and device for manufacturing metal ferrules used for optical fibers:US2004002813A1[P].2003-01-02.
[52] 見城晃.针管制造装置:JP2019203167A1[P].2019-11-28.

微细金属管制造技术现状与研究进展^*

Current status and research progress of metal micro-tube manufacturing technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

[1]	张保家,杨涛,张有信,王凌鹏. 基于模糊PID的微细金属丝拉拔张力控制研究[J]. 现代制造工程, 2021, 493(10): 107-113.
[2]	张有信，杨涛，王凌鹏，王方舟. 微细金属丝直线式拉丝工艺及拉丝装备设计研究[J]. 现代制造工程, 2020, 474(3): 105-109.
[3]	周鑫焱,田建艳,高炜,杨胜强,高云松,. 基于专家推理的滚抛磨块优选模型研究[J]. 现代制造工程, 2020, 477(6): 98-103.