基于数字化模型的自由曲面打印研究*

doi:10.16731/j.cnki.1671-3133.2024.08.003

现代制造工程 ›› 2024, Vol. 527 ›› Issue (8): 19-26.doi: 10.16731/j.cnki.1671-3133.2024.08.003

基于数字化模型的自由曲面打印研究^*

丁医华¹, 吴国良¹, 张天玮¹, 张婕^1,2

1 江南大学机械工程学院,无锡 214122;
2 江苏省食品先进技术装备重点实验室,无锡 214122

收稿日期:2024-01-02 出版日期:2024-08-18 发布日期:2024-08-30
作者简介:丁医华,硕士研究生,主要研究方向为三维重构和曲面打印。E-mail:2419558156@qq.com
基金资助:
^*江苏省产业前瞻竞争性项目(BE2017069)

Research on freeform surface printing based on digital models

DING Yihua¹, WU Guoliang¹, ZHANG Tianwei¹, ZHANG Jie^1,2

1 School of Mechanical Engineering,Jiangnan University,Wuxi 214122,China;
2 Jiangsu Province Key Laboratory of Advanced Food Technology and Equipment,Wuxi 214122,China

Received:2024-01-02 Online:2024-08-18 Published:2024-08-30

摘要/Abstract

摘要： 为实现手部自由曲面的精准功能化打印,提出了一种结合三维点云数字化成型工艺和自由曲面功能化成型工艺的方法。首先,通过三维扫描仪收集手部点云数据,并采用自适应加权引导滤波技术对曲面特征点进行平滑降噪处理;接着,使用基于曲率的自适应曲面几何采样算法在不丢失细节特征的同时对点云进行精简;随后,利用优化后的点云数据精确重构手部数字化模型,提取其自由曲面坐标并在其上设计功能化电路图案;最终,通过计算机辅助设计和矢量图形编辑软件生成的数控代码导入熔融沉积成型系统打印手部结构,并使用气溶胶喷射打印技术在手部自由曲面打印电子皮肤。试验结果表明,本试验采取的点云数据策略使手部扫描点的数量减少了80 %,达到了明显精简的效果。手部逆向重构模型的误差在0.4 mm以内,相对于实物原型的拟合度较高。实证展现了电子皮肤在手部自由曲面一体化成型的潜力,并为高精度功能化打印提供了技术参考。

关键词: 手部自由曲面, 数字化模型, 计算机辅助设计, 电子皮肤

Abstract: To achieve precise functional printing on the freeform surface of the hand,a method combining 3D point cloud digital molding process and freeform surface functionalization molding process is proposed. Firstly,the point cloud data of the hand is collected through a 3D scanner,and the surface feature points are smoothed and denoised using adaptive weighted guided filtering technology. Next,a curvature-based adaptive surface geometric sampling algorithm is employed to simplify the point cloud without losing detail features.Subsequently,the optimized point cloud data is used to accurately reconstruct the digital model of the hand,extract its freeform surface coordinates,and design functional circuit patterns on it. Finally,the hand structure is printed using a Fused Deposition Modeling (FDM) system with the NC code generated by computer-aided design and vector graphic editing software,followed by printing electronic skin on the freeform surface of the hand using aerosol jet printing technology. Experimental results show that the point cloud data strategy adopted in this experiment reduces the number of hand scanning points by 80 %,achieving significant simplification. The error range of the hand reverse reconstruction model is within 0.4 mm,showing a high degree of fitting to the physical prototype.The empirical demonstration showcases the potential of electronic skin in the integrated molding of the freeform surface of the hand and provides a technical reference for high-precision functional printing.

Key words: hand freeform surface, digital model, computer-aided design, electronic skin

中图分类号:

TH164

丁医华, 吴国良, 张天玮, 张婕. 基于数字化模型的自由曲面打印研究^*[J]. 现代制造工程, 2024, 527(8): 19-26.

DING Yihua, WU Guoliang, ZHANG Tianwei, ZHANG Jie. Research on freeform surface printing based on digital models[J]. Modern Manufacturing Engineering, 2024, 527(8): 19-26.

参考文献

[1] JIANG P,JI Z Y,WANG X L,et al.Surface functiona-lization—a new functional dimension added to 3D printing[J].Journal of Materials Chemistry C,2020,8(36):12380-12411.
[2] LI Z,HUANG J,YANG Y,et al.Additive manufacturing of conformal microstrip antenna using piezoelectric nozzle array[J].Applied Sciences-Basel,2020,10(9):3082.
[3] NOMURA K,HORII Y,USHIJIMA H,et al.Advanced screen-offset printing for fabricating thick electrodes on the concave surface of cylindrically curved glass[J].Microelectronic Engineering,2018,197:23-27.
[4] NOMURA K,KUSAKA Y,USHIJIMA H,et al.Screen-pad printing for electrode patterning on curvy surfaces[J].Microsystem Technologies,2016,22(3):635-638.
[5] PARK J,LEE Y,LEE H,et al.Transfer printing of electronic functions on arbitrary complex surfaces[J].ACS Nano,2020,14(1):12-20.
[6] CHEN M,DING X,QUE L,et al.Fabrication of microstructures on curved hydrogel substrates[J].Journal of Vacuum Science & Technology B,2022,40(5):052804.
[7] YU H,XIONG S,TAY C Y,et al.A novel and simple microcontact printing technique for tacky,soft substrates and/or complex surfaces in soft tissue engineering[J].Acta Biomaterialia,2012,8(3):1267-1272.
[8] ZHANG H,MOON S K.Reviews on machine learning approaches for process optimization in noncontact direct ink writing[J].ACS Applied Materials & Interfaces,2021,13(45):53323-53345.
[9] 李泽文,李雪芝,周建平.基于曲面重构的三元流叶轮短电弧加工轨迹规划及试验研究[J].现代制造工程,2023(10):100-106.
[10] SWENNEN G R J,POTTEL L,HAERS P E.Custom-made 3D-printed face masks in case of pandemic crisis situations with a lack of commercially available FFP2/3 masks[J].International Journal of Oral and Maxillofacial Surgery,2020,49(5):673-677.
[11] HALE L,LINLEY E,KALASKAR D M.A digital workflow for design and fabrication of bespoke orthoses using 3D scanning and 3D printing,a patient-based case study[J].Scientific Reports,2020,10(1):7028.
[12] FABIAN M,HUNADY R,KUPEC F.Reverse engineering and rapid prototyping in the process of developing prototypes of automotive parts[J].Manufacturing Technology,2022,22(6):669-678.
[13] LI X Z, LI X J,WU Y X.Denoising and smoothing based on 3-D body scan line point cloud data[J].Journal of Textile Research,2010,31(3):133-137.
[14] 税文,王培俊,屈仁飞,等.点云自适应精简算法在钢轨廓形三维结构光检测中的应用[J].铁道标准设计,2022,66(7):36-41.
[15] HALEEM A,JAVAID M,GOYAL A,et al.Redesign of car body by reverse engineering technique using steinbichler 3D scanner and projet 3D printer[J].Journal of Industrial Integration and Management-Innovation and Entrepreneurship,2022,7(2):171-182.
[16] KOLLURI R.Provably good moving least squares[J].ACM Transactions on Algorithms,2008,4(2):1-25.
[17] GONG M,ZHANG Z,ZENG D.A new simplification algorithm for scattered point clouds with feature preservation[J].Symmetry-Basel,2021,13(3):399.
[18] MAHDAOUI A,SBAI E H. 3D point cloud simplification based on k-nearest neighbor and clustering[J].Advances in Multimedia,2020(1):1-10.
[19] WANG G,WU L,HU Y,et al.Point cloud simplification algorithm based on the feature of adaptive curvature entropy[J].Measurement Science and Technology,2021,32(6):065004.

基于数字化模型的自由曲面打印研究^*

Research on freeform surface printing based on digital models

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

[1]	李纪珍;禹静;刘爽;蔡晋辉;孔明. 端框钻模数字化模型误差分析方法研究[J]. 现代制造工程, 2023, 510(3): 31-37.
[2]	刘镇海，周友行，徐长锋. 基于Plant Simulation的路灯杆件生产线产能优化方案研究[J]. 现代制造工程, 2020, 472(1): 35-42.
[3]	沈卫东, 徐志刚, 杨得玉, 朱卓悦. 基于三维CAD软件SINOVATION的梁设计软件开发[J]. 现代制造工程, 2018, 458(11): 77-84.
[4]	赵森, 赵庆志, 张林华, 王宏甲, 刘纪凯, 丁婷. 罗茨真空泵转子CAD/CAM研究与应用[J]. 现代制造工程, 2017, 437(2): 77-80.