紧凑布局设计的物理学研究及实验方法设计

doi:10.16731/j.cnki.1671-3133.2017.03.003

现代制造工程 ›› 2017, Vol. 438 ›› Issue (3): 7-17.doi: 10.16731/j.cnki.1671-3133.2017.03.003

紧凑布局设计的物理学研究及实验方法设计

马俊燕^1,2, 刘祥沙¹, 廖小平^1,2, 郑羽嘉², 鲁娟², 苏贵长²

1 广西大学机械工程学院,南宁 530004
2 广西制造系统与先进制造技术重点实验室,南宁 530004

收稿日期:2015-03-20 出版日期:2017-03-18 发布日期:2018-01-08
作者简介:马俊燕,副教授,博士研究生,研究方向为CAD、CAM及优化设计。
E-mail:mjymonkey@163.com
基金资助:
国家自然科学基金资助项目(51265002);广西教育厅项目(201204LX009)

Research on physics methodology and experimental design for compact layout

Ma Junyan^1,2, Liu Xiangsha¹, Liao Xiaoping^1,2, Zheng Yujia², Lu Juan², Su Guichang²

1 College of Mechanical and Engineering,Guangxi University,Nanning 530004,China
2 Guangxi Key Laboratory of Manufacturing System & Advanced Manufacturing Technology,Nanning 530004,China

Received:2015-03-20 Online:2017-03-18 Published:2018-01-08

摘要/Abstract

摘要： 根据二维紧凑布局的物理学方法,利用缠绕在一系列待布物体上的橡皮筋的弹性收缩能力来模拟紧凑布局过程,这种方法是布局优化设计的一个新思路。建立基于物理学的紧凑布局模型,分析其物理运动规律,通过实验设计捕捉待布局物体的运动轨迹,验证其方法和模型的可靠性。

关键词: 二维紧凑布局, 物理学方法, 实验设计, 运动规律

Abstract: Physics-based packing for two-dimensional layout design is a new way which use a rubber band wrapping around some objects to simulate the compacting process due to elastic contraction ability.Constructed the model of physics-based layout design and analyze the rule of physical movement.An experiment is designed to obtain the path of the moving objects.The results of the bench test match well with the analysis of the movement rule.So does physics-based method for layout design.

Key words: two-dimensional compact layout, physics method, experiment design, movement rule

中图分类号:

TH122

马俊燕, 刘祥沙, 廖小平, 郑羽嘉, 鲁娟, 苏贵长. 紧凑布局设计的物理学研究及实验方法设计[J]. 现代制造工程, 2017, 438(3): 7-17.

Ma Junyan, Liu Xiangsha, Liao Xiaoping, Zheng Yujia, Lu Juan, Su Guichang. Research on physics methodology and experimental design for compact layout[J]. Modern Manufacturing Engineering, 2017, 438(3): 7-17.

参考文献

[1] THAKUR M K,KUMARI M,DAS M.Architectural layout planning using genetic algorithms.Computer Science and Information Technology(ICCSIT)[C].[S.l.]:2010 3rd IEEE International Conference on,2010.
[2] 张屹,卢超,张虎,等.基于差分元胞多目标遗传算法的车间布局优化[J].计算机集成制造系统,2013,19(4):727-734.
[3] 隋文涛,董社勤,边计年.岛式FPGA线长驱动快速布局算法[J].计算机辅助设计与图形学学报,2009,21(9):1275-1282.
[4] LIU Jingfa,LI Gang,CHEN Duanbing,et al.Two-dimensional equilibrium constraint layout using simulated annealing[J].Computers & Industrial Engineering,2010,59(4):530-536.
[5] 王惠娟,王金敏,李乃华.机械产品布局设计的分层递阶求解模型[J].现代制造工程,2004(2):111-113.
[6] 苗作华,郭胤哲,陈勇,等.基于多智能体模型的城市土地利用空间布局优化[J].湖北农业科学,2013,52(18):4342-4345.
[7] 张则强,程文明.双行布局问题的分解策略及启发式求解方法[J].计算机集成制造系统,2014,20(3):559-568.
[8] 来建良,张树有,谭建荣,等.多腔模流道的单元化布局建模技术研究[J].浙江大学学报(工学版),2009,43(1):36-41.
[9] 萨日娜,张树有,徐敬华,等.基于位姿图和性能融合的产品布局设计方法[J].机械工程学报,2012,48(5):116-123.
[10] 张旭,冯恩民.卫星舱三维布局优化模型及判断不干涉性算法[J].运筹与管理,2004,13(3):15-19.
[11] Euro Special Interest Group on Cutting and Packing(ESICUP) website[EB/OL].http://paginas.fe.up.pt/~esicup/tiki-index.php.
[12] HOPPER E.Two-dimensional packing utilising evolutionary algorithms and other meta-heuristic methods[D].Cardiff:University of Wales,2000.
[13] GOMES A M,OLIVEIRA J F.Solving irregular strip packing problems by hybridizing simulated annealing and linear programming[J].European Journal of Operational Research,2006,171(3):811-829.
[14] DALALAH D,KHRAIS S,BATAINEH K.Waste minimization in irregular stock cutting[J].Journal of Manufacturing Systems,2014,33(2014):27-40.

紧凑布局设计的物理学研究及实验方法设计

Research on physics methodology and experimental design for compact layout

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics