现代制造工程 ›› 2017, Vol. 443 ›› Issue (8): 68-72.doi: 10.16731/j.cnki.1671-3133.2017.08.013

• CAD/CAE/CAPP/CAM • 上一篇    下一篇

基于经济损失的机械系统失效排序方法

杨宏芳1, 闫景扬2, 许波2   

  1. 1 滨州市技术学院实训中心,滨州 371600;
    2 河北工业大学机械工程学院,天津 300130
  • 收稿日期:2016-02-04 出版日期:2017-08-20 发布日期:2018-01-09
  • 作者简介:杨宏芳,讲师,学士,研究方向为创新设计、机电一体化设计。闫景扬,硕士研究生,研究方向为失效分析、机电一体化设计。许波,副教授,博士,研究方向为创新设计、失效分析,以及机电一体化设计。E-mail:yanghongfang_80@163.com
  • 基金资助:
    国家自然科学基金项目(51605135)

Ranking method for the failure of mechanical system based on the economic loss

Yang Hongfang1, Yan Jingyang2, Xu Bo2   

  1. 1 Actual Training Center,Binzhou Technical College,Binzhou 371600,Shandong,China;
    2 School of Mechanical Engineering,Hebei University of Technology,Tianjin 300130,China
  • Received:2016-02-04 Online:2017-08-20 Published:2018-01-09

摘要: 失效分析中的风险优先数(Risk Priority Number,RPN)方法是目前研究的热点。由于RPN方法自身存在的缺陷以及机械系统失效表现出的复杂多因性特点,RPN方法在应用于机械系统失效分析时常导致结果失真。在总结分析RPN方法缺陷及其原因的基础上,提出基于经济损失的RPN方法——ERPN方法,该方法的失效排序将主观性较强的严重度放在定性分析环节,在定量分析中引入反映失效影响更为准确的经济损失来代替主观性较强的难检度,并对概率分析进行了改善,针对机械系统失效的多因性提出了新的失效解决优先值计算公式。ERPN方法有望改善RPN方法的固有缺陷,使分析结果更加客观。

关键词: 失效分析, 优先值计算, 经济损失, 风险优先数

Abstract: Risk Priority Number(RPN) method in the failure analysis is the hotspot of research at present.Because of the defects of RPN and complex mix-reasoning of the failure in the mechanical system,RPN method may lead to wrong decision when it used to the mechanical system failure analysis.Based on the study of defects in the RPN,put forward the ERPN method based on the economic loss.This method put the severity which has strong subjectivity in the qualitative analysis,using the economic loss which reflects the failure effect more accurate instead of severity,improves the probability analysis and put forward a new formula for the priority number calculation according to the mix-reasoning of the failure in the mechanical system.ERPN method is expected to improve the RPN and the analysis results could be more objective.

Key words: failure analysis, priority number calculation, economic loss, risk priority number

中图分类号: 


版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn
访问总数:,当日访问:,当前在线: