物联网驱动的SMT车间制造执行系统研究

doi:10.16731/j.cnki.1671-3133.2018.02.009

现代制造工程 ›› 2018, Vol. 449 ›› Issue (2): 46-54.doi: 10.16731/j.cnki.1671-3133.2018.02.009

物联网驱动的SMT车间制造执行系统研究

张浩¹,马瑞¹,葛世伦¹,刘平²

1 江苏科技大学经济管理学院,镇江 212003;
2 福建摩尔软件有限公司,福州 350158

收稿日期:2016-11-28 出版日期:2018-02-20 发布日期:2018-08-07
作者简介:张浩,教授,博士,主要研究方向为制造执行系统、制造业信息化。E-mail:haozh168@aliyun.com
基金资助:
国家自然科学基金重点项目(71331003);江苏省青蓝工程优秀青年骨干教师项目;国家科技支撑计划项目(2015BAF21B01-JKD)

Study on manufacturing execution system of SMT manufacturing workshop based on internet of things

Zhang Hao¹,Ma Rui¹,Ge Shilun¹,Liu Ping²

1 School of Economics & Management,Jiangsu University of Science & Technology,Zhenjiang 212003,Jiangsu,China;
2 Fujian Moresoft Co.Ltd.,Fuzhou 350158,China

Received:2016-11-28 Online:2018-02-20 Published:2018-08-07

摘要/Abstract

摘要： 为了高效利用表面贴装技术(Surface Mounted Technology,SMT),提升SMT设备的使用效率,缩短产品的生产周期,提高生产效率,实现车间的可视化、精细化管控,解决生产计划与车间执行过程无法衔接的矛盾,研究并构建了一种基于RFID技术的SMT车间制造执行系统,在详细分析SMT车间生产流程和业务需求的基础上,基于RFID技术构建了功能模型并设计了体系结构,并对基于RFID的SMT车间数据采集及制造过程监控技术进行了系统研究。最后以广州某电子企业的SMT车间为例,验证了该系统的可行性和有效性。

关键词: 射频识别技术, 表面贴装技术, 制造执行系统

Abstract: To use surface mounting technology efficiently,and to enhance the efficiency of SMT equipment,proposed a manufacturing execution system based on RFID in SMT workshop to increase productivity and shorten the production cycle,achieving workshop visual and fine control.On the basis of analyzing production processes and business requirements in workshop,the functional model and the system architecture based on RFID are designed.RFID-enabled real-time data acquisition technology and manufacturing process monitoring technology are systematic studied.Finally,an example of an electronic enterprise in Guangzhou illustrates the feasibility and effectiveness of the manufacturing execution system proposed.

Key words: radio frequency identification, surface mount technology, manufacturing execution system

中图分类号:

TH16

张浩,马瑞,葛世伦,刘平. 物联网驱动的SMT车间制造执行系统研究[J]. 现代制造工程, 2018, 449(2): 46-54.

Zhang Hao,Ma Rui,Ge Shilun,Liu Ping. Study on manufacturing execution system of SMT manufacturing workshop based on internet of things[J]. Modern Manufacturing Engineering, 2018, 449(2): 46-54.

参考文献

[1] 叶建芳.电子制造业准ATO模式生产计划和生产控制方法研究[D].杭州:浙江大学,2011.
[2] 张映锋,赵曦滨,孙树栋,等.一种基于物联技术的制造执行系统实现方法与关键技术[J].计算机集成制造系统,2012,18(12):2634-2642.
[3] DAI Q Y,ZHONG R Y,HUANG G Q,et al.Radio Frequency Identification-enabled Real-time Manufacturing Execution System:A Case Study in an Automotive Part Manufacture[J].International Journal of Computer Integrated Manufacturing,2012,25(1/2/3):51-65.

[4] ZHONG R Y,DAI Q Y,QU T,et al.RFID-enabled real-time manufacturing execution system for mass-customization production[J].Robotics and Computer-Integrated Manufacturing,2013,29(2):283-292.
[5] CHEN J C,CHENG C H,HUANG P T B.Supply chain management with lean production and RFID application:a case study[J].Expert Systems with Applications,2013,40(9):3389-3397.
[6] 徐晶.船舶管件精益化制造物联网系统研究[D].广州:广东工业大学,2014.
[7] 刘继红,余杰,朱玉明.基于制造物联的航天产品研制过程的技术状态控制技术[J].计算机集成制造系统,2015,21(7):1781-1789.
[8] 贾润军.基于SOA的MES系统的设计与实现[D].苏州:苏州大学,2011.
[9] LPEZ T S,RANASINGHE D C,PATKAI B,et al.Taxonomy Technology and Applications of Smart Objects[J].Information Systems Frontiers,2011,13(2):281-300.
[10] GOUMOPOULOS C,KAMEAS A,HELLAS P.Smart Objects as Components of UbiComp Applications[J].International Journal of Multimedia and Ubiquitous Engineering,2009,4(3):1-20.
[11] GRUNINGER M,SHAPIRO S,FOX M S,et al.Combining RFID with Ontologies to Create Smart Objects[J].International Journal of Production Research,2010,48(9):2633-2654.
[12] 郑林江.基于智能对象的混流装配线敏捷生产管理技术研究[D].重庆:重庆大学,2010.

物联网驱动的SMT车间制造执行系统研究

Study on manufacturing execution system of SMT manufacturing workshop based on internet of things

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	温明川, 于璞, 杨晓英, 刘道钦. 基于MES的拖拉机装配质量管理信息系统研究[J]. 现代制造工程, 2018, 451(4): 51-58.
[2]	姚涛, 张忠波, 俞涛, 陈少平. 船舶军工制造企业MES应用研究[J]. 现代制造工程, 2017, 438(3): 31-37.