碳纤维复合材料螺栓连接性能综述

doi:10.16731/j.cnki.1671-3133.2018.09.029

现代制造工程 ›› 2018, Vol. 456 ›› Issue (9): 154-160.doi: 10.16731/j.cnki.1671-3133.2018.09.029

• 综述 • 上一篇

碳纤维复合材料螺栓连接性能综述

孙涛, 周金宇

江苏理工学院常州市装备再制造工程重点实验室,常州 213001

收稿日期:2017-03-29 出版日期:2018-09-20 发布日期:2018-09-27
作者简介:孙涛,硕士研究生,研究方向为装备轻量化设计与制造。E-mail:1025471073@qq.com
基金资助:
国家自然科学基金项目(51275221);江苏省高校自然科学研究重大项目(16KJA460002);江苏省产业前瞻与共性关键技术重点项目(BE2015007-1)

Summary for the connection performance of carbon fiber composite bolt

Sun Tao, Zhou Jinyu

Changzhou Key Laboratory of Equipment Remanufacturing Engineering,Jiangsu University of Technology,Changzhou 213001,Jiangsu,China

Received:2017-03-29 Online:2018-09-20 Published:2018-09-27

摘要/Abstract

摘要： 碳纤维复合材料具有众多优良的性能,目前在民用及航空航天领域已被广泛应用,但是碳纤维复合材料的结构连接强度问题一直是制约其发展的重要因素。综述了碳纤维复合材料螺栓连接方法,分别讨论了碳纤维增强复合材料螺栓连接的强度理论、强度预测和强度影响因素(干涉配合、预紧力、螺栓钉头形式及铺层顺序)对连接强度的影响规律。最后总结了碳纤维复合材料螺栓连接研究的发展趋势。

关键词: 碳纤维复合材料, 螺栓连接, 失效分析

Abstract: Carbon fiber composite has many excellent properties. It has been widely used in the field of civil and aerospace,but the structural connection strength of carbon fiber reinforced cmposites has been an important factor restricting its development.This summarizes the method of carbon fiber composite bolt connection. The strong theory, strength prediction and influence factors of the bolt connection of carbon fiber composite materials(interference fit,pretightening force,the form of the screw head and the sequence of the stacking sequence) are discussed respectively. Finally, the development trend of carbon fiber composite bolt connections is summarized.

Key words: carbon fiber composite materials, bolt connection, failure analysis

中图分类号:

TB332

孙涛, 周金宇. 碳纤维复合材料螺栓连接性能综述[J]. 现代制造工程, 2018, 456(9): 154-160.

Sun Tao, Zhou Jinyu. Summary for the connection performance of carbon fiber composite bolt[J]. Modern Manufacturing Engineering, 2018, 456(9): 154-160.

参考文献

[1] 张菡英,刘明.碳纤维复合材料的发展及应用[J].工程塑料应用,2015,43(11):133-135.
[2] 程章,朱平,冯奇.碳纤维增强复合材料汽车翼子板优化设计研究[J].汽车工程学报,2015,5(5):368-373.
[3] BULENT M.Progressive failure analysis of pinloaded carborn-epoxy woven composite plates[J].Composite Science and Technology,2002,62(9):1259-1271.
[4] COLLINGS T A.On the bearing strengths of CFRP laminates[J].Composite,1982,13(3):241-252.
[5] CHANGE M Y M,WANG X F C R,SCHULTHEISZ J M H.Predicition and three-dimensional Monte-Carlo simulation for tensile properties of unidirectional hybrid composite[J].Composites Science and Technology,2005,65(11/12):1719-1727.
[6] KADDOUR A S,HINTON M J,SODEN P D.A comaison of the predictive capabilities of current failure theories for composite laminates:Additional contributions [J].Composites Science and Technology,2004,64(3/4):449- 476.
[7] SUN C T,QUINN B J.Comparative evaluation of failure analysis methods for composite laminates:DOT/FAA/AR-95/109[R].Washington D.C.:NASA,1996.
[8] ORIFICI A C,HERSZBERG I, THOMSON R S.Reviw of methodologies for composite material modelling incorporateng failure[J].Composite Structures,2008,86(1/2/3):194-210.
[9] LIU K S,TSAI S W. A progressive quadratic failure criterion for a lninate[J].Composites Science and Technology,1998,58(7):1023-1032.
[10] HASHIN Z.Failure criteria for unidrectional fiber copmosite[J].Journal of Applied Mechanics,1980(47):329-334.
[11] BOGETTI T A, HOPPEL C P, HARIK V M.Predicting the nonlinear response and progressive failure of composite laminates[J].Composites Science and Technology,2004,64(3):329-342.
[12] CUNTZE R,FREUND A.The predictive capability of failuremode concep-based strength criteria for multidirectional laminates[J].Composites Science and Technology,2004,64(3):343-377.
[13] ZINOVIEV P A, GRIGORIEV S V, LEBEDEVA O V.The strength of multilayered composites under plane-stress state[J]. Composites Science and Technology, 1998,58(7):1209-1223.
[14] HA S K,JIN K K,HUANG Y.Micro-Mechanical of Failure (MMF) for Continuous Fiber Reinforced Composites[J].Journal of Composite Materials,2008,42(18):1873-1895.
[15] HART-SMITH L J.Design methodology for bonded-bolted composite joints:ADA117342[R].Long Beach:Douglas Aircraft Company,Mcdonnell Douglas Corporation,1982.
[16] HART-SMITH L J.Bolted joints in graphite-epoxy composites:CR144899[R].Long Beach:Douglas Aircraft Company,1976.
[17] HART-SMITH L J.Mechanically-fastened joints for advanced composites—phenomenological considerations andsimple analyses:Fibrous Composites in Structural Design[R].[S.l.]:Springer US,1980:543-574.
[18] CHANG F K,SCOTT R A,SPRINGER G S.Strength of mechanically fastened composite joints[J].Journal of Composite Material,1982(16):470- 494.
[19] HART-SMITH L J.Bolted joints in graphite epoxy composite:NASACR 144899[R].Long Beach:Douglas Aircraft Company,1976.
[20] EGAN B,MCCARTHY C T,MCCARTHY M A,et al.Stress analysis of single-bolt,single-lap,countersunk compositejoints with variable bolthole clearance[J].Composite Structures,2012,94(3):1038-1051.
[21] EGAN B,MCCARTHY C T,MCCARTHY M A,et al.Modelling a single-bolt countersunk composite joint using implicit and explicit finite element analysis[J].Computational Materials Science,2012(64):203-208.
[22] EGAN B,MCCARTHY C T,MCCARTHY M A,et al.Modelling bearing failure in countersunk composite joints under quasi-static loading using 3D explicit finite element analysis[J].Composite Structures,2014(108):963-977.
[23] SHOKRICH M M,LESSARD L B.Progressive fatigue damage modeling of composite materials, Part I:modeling[J].Journal of Composite Materials,2000(34):1056-1080.
[24] SHOKRICH M M,LESSARD L B. Progressive fatigue dam-age modeling of composite materials,PartⅡ:material characterization and model verification[J].Journal of Composite Material,2000(34):1081-1116.
[25] 张俊琪,刘龙权,陈昆昆,等.干涉配合对复合材料机械连接结构承载能力的影响[J].上海交通大学学报,2013,47(11):1795-1800.
[26] 王佳宁,赵美英,周银华.预紧力对层合板螺栓连接强度的影响研究[J].航空工程进展,2012(2):190-194.
[27] 陈昆昆,刘龙权,汪海.过盈配合和预紧力的混合作用对复合材料机械连接结构的影响及其机制[J].复合材料学报,2013,30(6):244-251.
[28] 郭家平,熊璇,党晓娟.钉头形式对复合材料层合板机械连接强度的影响[J].南京航空天大学学报,2016,48(1):22-28.
[29] CHISHTI M,WANG W H,THOMSON R S,et al.Experimental investigation of damage progression and strength of countersunk composite joint [J].Composite Structures,2012,94(3):865-873.

[30] CHISHTI M,WANG W H,THOMSON R S,et al.Numerical analysis of damage propagation and strength of countersunk composite joints[J].Composite Structures,2012,94(2):645-653.
[31] 贾云超,关志东,宋晓君.复合材料-金属械连接性能研究[J].玻璃钢/复合材料,2015(4):66-70.
[32] 顾亦磊,赵美英,王芳.复合材料层合板机械连接失效分析及铺层优化[J].陕西理工学院学报,2006,22(4):14-16.
[33] ALAATTIN Aktas.Bearing strength of carbon epoxy laminates under static and dynamic loading[J].Composite Structures,2005,67(4):485- 489.
[34] ALAATTIN Aktas,HUSNU Dirikolu M.The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength[J].Composite Structures,2003,53(2):107-111.
[35] HEUNG-JOON Park.Effects of stacking sequence and cla-mping force on the bearing strengths of mechanicallyfastened joints in composite lamintes[J].Composite Structures,2001,53(2):217-221.
[36] BULENT Murat Icten, ONUR Sayman.Composites Science and Technology[J].Composite Structures,2003(63):727.
[37] ALAATTIN Aktasa,HUSNU Dirikolu M.Composites Science and Technology[J].Composite Structures,2001(61):1605.

碳纤维复合材料螺栓连接性能综述

Summary for the connection performance of carbon fiber composite bolt

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

[1]	刘光辉，伍川，吕中宾，杨晓辉，叶中飞. 输电铁塔螺栓紧固特性影响因素试验研究[J]. 现代制造工程, 2022, 498(3): 84-91.
[2]	刘宏杰，曾超，隋鹏超，刘伦伦，程市. 基于Python语言的发动机螺栓连接滑移分析和设计改进[J]. 现代制造工程, 2020, 479(8): 67-71.
[3]	邱冬梅, 沈星. 铝蜂窝板螺栓连接件的动力学分析及建模[J]. 现代制造工程, 2018, 459(12): 97-102.
[4]	杨宏芳, 闫景扬, 许波. 基于经济损失的机械系统失效排序方法[J]. 现代制造工程, 2017, 443(8): 68-72.
[5]	陈正玮, 李树栋, 葛万明, 宗艳, 耿烽. 地铁车辆螺栓连接装配失效实验研究[J]. 现代制造工程, 2017, 446(11): 141-144.