基于聚类的关节式坐标测量机姿态优化方法

doi:10.16731/j.cnki.1671-3133.2017.03.025

现代制造工程 ›› 2017, Vol. 438 ›› Issue (3): 141-144.doi: 10.16731/j.cnki.1671-3133.2017.03.025

• 仪器仪表/检测/监控 • 上一篇下一篇

基于聚类的关节式坐标测量机姿态优化方法

汪金鹏, 郭阳宽, 祝连庆, 潘志康

北京信息科技大学光电测试技术北京市重点实验室,北京 100101

收稿日期:2015-11-12 出版日期:2017-03-18 发布日期:2018-01-08
作者简介:汪金鹏,硕士研究生,研究方向为光电精密测量技术。
郭阳宽,博士,教授,研究方向为光电精密测量技术。
祝连庆,博士,教授,研究方向为光电精密测量技术。
潘志康,硕士,讲师,研究方向为光电测试技术。
E-mail:13693193028@163.com
基金资助:
国家自然科学基金资助项目(51075038,51375057);国家重大科学仪器设备研发专项项目(2013YQ22089304) ;长江学者和创新团队发展计划资助项目(IRT1212);北京市教委面上项目(KM201411232004)

Measuring posture optimization for articulated arm coordinate measuring machine based on cluster

Wang Jinpeng, Guo Yangkuan, Zhu Lianqing, Pan Zhikang

Beijing Key Laboratory of Optoelectronic Measurement Technology,Beijing Information Science and Technology University,Beijing 100101,China

Received:2015-11-12 Online:2017-03-18 Published:2018-01-08

摘要/Abstract

摘要： 为了提高关节式坐标测量机的精度,提出了一种基于聚类的测量姿态优化方法。在数学模型的基础上,通过对测量机的测量姿态信息进行聚类来形成簇,并对簇进行打分和提取,最后根据提取结果对测量姿态进行优化。实验结果表明,测量机精度受姿态影响较大,优化后精度提高了约1倍,为进一步研究奠定了基础。

关键词: 坐标测量机, 聚类分析, 姿态优化, 数学模型

Abstract: In order to improve the accuracy of articulated arm coordinate measuring machine,the measuring posture optimization based on clustering analysis was proposed.On the basis of the mathematical model,by using systematic cluster analysis,cluster of posture information was constructed,clusters were extracted by scoring method.Measuring posture optimization was finished by result of extraction.The experimental results show that the accuracy of the machine was greatly influenced by the measuring posture,the measuring accuracy was improved by 1 time after the measuring posture optimization.It provides a basis for further research.

Key words: coordinate measuring machine, clustering analysis, posture optimization, mathematical models

中图分类号:

TH721

汪金鹏, 郭阳宽, 祝连庆, 潘志康. 基于聚类的关节式坐标测量机姿态优化方法[J]. 现代制造工程, 2017, 438(3): 141-144.

Wang Jinpeng, Guo Yangkuan, Zhu Lianqing, Pan Zhikang. Measuring posture optimization for articulated arm coordinate measuring machine based on cluster[J]. Modern Manufacturing Engineering, 2017, 438(3): 141-144.

参考文献

[1] MUTILBA U,KORTABERRIA G,OLARRA A,et al.Performance Calibration of Articulated Arm Coordinate Measuring Machine[J].Procedia Engineering,2013,63(10):720-727.
[2] GONZÁLEZ-MADRUGA D,BARREIRO J,CUESTA E,et al.AACMM Performance Test:Influence of Human Factor and Geometric Features [J].Procedia Engineering,2014,69(1):442-448.
[3] 艾竹君,胡毅,费业泰.关节式坐标测量机测量原理特点及应用理论分析[J].制造业自动化,2014(21):80-83.
[4] PATIÑO H,GONZALEZ-MADRUGA D,CUESTA E,et al.Study of Virtual Features in the Performance of Coordinate Measuring Arms [J].Procedia Engineering,2014,69(1):433-441.
[5] 黄奎,莫健华,钟凯,等.柔性关节臂式测量机的误差仿真分析[J].北京科技大学学报,2010,32(10):1346-1352.
[6] DENAVIT J,HARTENBERG R S.A kinematic notation for lower-pair mechanisms based on matrices[J].Trans.of the ASME.Journal of Applied Mechanics,1955(22):215-221.
[7] 祝连庆,李伟仙,潘志康,等.变臂关节式坐标测量机的参数自标定方法研究[J].仪器仪表学报,2014,35(3):572-579.
[8] 高贯斌,王文,林铿,等.关节臂式坐标测量机误差仿真系统建模与分析[J].计算机集成制造系统,2009,15(8):1534-1540.
[9] SANTOLARIA J,BRAU A,VELÁZQUEZ J,et al.A self-centering active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines[J].Measurement Science & Technology,2010,21(5):55101-55111.
[10] BARALDIA Piero,MAIOA Francesco Di,RIGAMONTIA Marco,et al.Clustering for unsupervised fault diagnosis in nuclear turbine shut-down transients[J].Mechanical Systems & Signal Processing,2015,58(6):160-178.
[11] MENA R,HENNEBEL M,LI Y F,et al.Self-adaptable hierarchical clustering analysis and differential evolution for optimal integration of renewable distributed generation[J].Applied Energy,2014,133(6):388-402.
[12] 吴永明,侯亮,赖荣燊.一种面向产品族设计的模块动态规划方法[J].计算机集成制造系统,2013,19(7):1456-1462.
[13] 杨涛,杨育,张雪峰,等.基于客户聚类分析的产品概念设计方案评价决策方法[J].计算机集成制造系统,2015,21(7):1669-1678.
[14] 简金宝,王媛媛,曾祥君,等.基于系统聚类分析的馈线接地保护[J].电力系统自动化,2013,37(5):111-116.
[15] 杨燕,靳蕃.聚类有效性评价综述[J].计算机应用研究,2008,25(6):1630-1632.
[16] 晁永生,孙文磊.基于聚类分析的白车身零件工艺模板提取[J].计算机集成制造系统,2014,20(12):3032-3039.

基于聚类的关节式坐标测量机姿态优化方法

Measuring posture optimization for articulated arm coordinate measuring machine based on cluster

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 9

编辑推荐

Metrics

[1]	史天亮，唐志文. 铁路大型养路机械轮对大批量选配[J]. 现代制造工程, 2021, 492(9): 47-51.
[2]	陈国才. 基于函数型大数据聚类分析的机械故障在线检测[J]. 现代制造工程, 2021, 489(6): 142-147.
[3]	陈天毅，倪喜卓，杜立强，曾励，罗强，陈旦. 风洞模型电动推杆Y机构运动同步控制系统建模与仿真性能分析[J]. 现代制造工程, 2020, 479(8): 72-81.
[4]	陈登凯，王憬鸾，郭家言，李方舟，李志. 基于功能元参数相关性的产品功能模块设计方法研究[J]. 现代制造工程, 2020, 478(7): 94-101.
[5]	王刚,曹恩国,赵永武,高阳. 基于重力势能转化的下肢外骨骼设计与动力学研究[J]. 现代制造工程, 2020, 481(10): 51-56.
[6]	周明松, 马培花. 汽轮机斜齿汽封的数控加工分析[J]. 现代制造工程, 2018, 452(5): 84-88.
[7]	沈振辉, 杨拴强. 基于模糊聚类及相关性分析的温度测点布置优化方法研究[J]. 现代制造工程, 2018, 458(11): 112-118.
[8]	于洋,张怡,赵伟,董晓博. 注采联作滑套阀用弹簧片的设计与实验验证[J]. 现代制造工程, 2018, 448(1): 141-145.
[9]	宋红滚, 刘国平, 刘建胜, 王轮. 基于点集拓扑学涡旋曲面轮廓度误差评定[J]. 现代制造工程, 2017, 447(12): 133-138.