N091型数控车床工程训练仿真系统开发

doi:10.16731/j.cnki.1671-3133.2017.04.015

现代制造工程 ›› 2017, Vol. 439 ›› Issue (4): 76-81.doi: 10.16731/j.cnki.1671-3133.2017.04.015

N091型数控车床工程训练仿真系统开发

吴焕琦¹, 任颖慈¹, 张越¹, 陈春阳²

1 南京航空航天大学机电学院,南京 210016
2 南京航空航天大学工程训练中心,南京 210016

收稿日期:2016-08-26 出版日期:2017-04-18 发布日期:2018-01-09
作者简介:吴焕琦,本科生。
E-mail:953668709@qq.com
基金资助:
南京航空航天大学实验技术研究与开发重点项目(2015031200016186)

Development of engineering training simulation system for N091 NC lathe

Wu Huanqi¹, Ren Yingci¹, Zhang Yue¹, Chen Chunyang²

1 College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China
2 Engineer Training Center,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China

Received:2016-08-26 Online:2017-04-18 Published:2018-01-09

摘要/Abstract

摘要： 以VB6.0软件为开发工具,设计开发了一款用于学生工程训练的数控车床仿真系统。该系统以N091型数控车床配备的Fanuc-0i Mate TB 数控系统为主要仿真对象,实现了在PC端的数控程序编写、代码检错、工艺参数设置报警、加工过程动画模拟、图形仿真以及操作培训等功能,构建了一个教与学有机结合的可视化的数控仿真教学平台,使学生能够尽快掌握数控车床的操作要领,养成良好的编程习惯。介绍了此系统设计思路关键实现技术以及部分功能实现原理与代码等。

关键词: N091型数控车床, VB6.0软件, 数控仿真

Abstract: Aiming at practical training and learning,the NC lathe simulation system is designed on VB 6.0.The system,which simulates the Fanuc-0i Mate TB NC operating system equipped by N091 NC lathe,realizes functions such as,writing NC code,checking code errors,warning on improper process properties,simulation of processing and operation training on PC.The trainers could easily master the skill of operating N091 NC lathe through this NC simulation system which,organically,combines learning and teaching visually.The design,some key technologies as well as its program code are introduced in this treatise.

Key words: N091 NC lathe, VB 6.0 software, NC simulation

中图分类号:

TP391.9

吴焕琦, 任颖慈, 张越, 陈春阳. N091型数控车床工程训练仿真系统开发[J]. 现代制造工程, 2017, 439(4): 76-81.

Wu Huanqi, Ren Yingci, Zhang Yue, Chen Chunyang. Development of engineering training simulation system for N091 NC lathe[J]. Modern Manufacturing Engineering, 2017, 439(4): 76-81.

N091型数控车床工程训练仿真系统开发

Development of engineering training simulation system for N091 NC lathe

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics