基于Plant Simulation与超效率DEA的“水蜘蛛”配置研究

doi:10.16731/j.cnki.1671-3133.2018.01.009

现代制造工程 ›› 2018, Vol. 448 ›› Issue (1): 40-47.doi: 10.16731/j.cnki.1671-3133.2018.01.009

• 先进制造系统管理运作 • 上一篇下一篇

基于Plant Simulation与超效率DEA的“水蜘蛛”配置研究

王贵用¹,周尔民²,刘秋红²

1 福建师范大学闽南科技学院,泉州 362332;
2 华东交通大学机电与车辆工程学院,南昌 330013

收稿日期:2016-11-16 出版日期:2018-01-20 发布日期:2018-07-24
作者简介:王贵用,助教,主要研究方向为虚拟制造、工业工程。周尔民,教授,主要研究方向为CAD/CAM、虚拟制造技术。刘秋红,硕士研究生,主要研究方向为生产物流系统仿真。E-mail:wgy8908@163.com

The configuration research based on the Plant Simulation and super efficiency DEA“water spider”

Wang Guiyong¹,Zhou Ermin²,Liu Qiuhong²

1 Minnan Science and Technology Institute,Fujian Normal University,Quanzhou 362332,Fujian,China;
2 School of Mechatronics and Vehicle Engineering,East China Jiaotong University,Nanchang 330013,China

Received:2016-11-16 Online:2018-01-20 Published:2018-07-24

摘要/Abstract

摘要： 根据“水蜘蛛”作业的特点,以格特拉克(江西)传动系统有限公司DCT工厂为研究实例,对一中心多分区策略(1CNP)下的“水蜘蛛”作业系统进行配置研究。基于Plant Simulation仿真软件构建8个仿真模型进行24组仿真实验,得到24种配置情况下“水蜘蛛”作业系统完成相同搬运任务的输出参数;将仿真的输入和输出参数作为投入与产出变量,基于超效率数据包络分析(Data Envelopment Analysis,DEA)评价模型对24种配置进行效率评价,得到最优配置为分区一有3个“水蜘蛛”,分区二有1个“水蜘蛛”,“水蜘蛛”的可用性为100 %。

关键词: “水蜘蛛”作业, Plant Simulation软件, 超效率DEA评价模型, 效率评价, 配置研究

Abstract: Taking the DCT factory of GETRAG (Jiangxi)Transmission Co.Ltd.as an example,studying the system configuration of “water spider” under scheduling strategy of one center and multiple partition (1CNP)based on the characteristics of operation for "water spider".Building eight simulation models based on Plant Simulation software,then doing 24 groups of simulation experiment and getting 24 species of output parameters about finishing same handling task for the “water spider”.Seeing the input and output parameters of simulation as the input and output variables of DEA model.Based on super efficiency DEA evaluation model to evaluate efficiency of 24 kinds of configuration,getting the optimal configuration is that part one allocate three “water spiders”,part two allocate one “water spiders”,and the availability of “water spiders” set as 100 %.

Key words: “water spider” work, Plant Simulation software, the super efficiency DEA model, efficiency evaluation, configuration research

中图分类号:

王贵用,周尔民,刘秋红. 基于Plant Simulation与超效率DEA的“水蜘蛛”配置研究[J]. 现代制造工程, 2018, 448(1): 40-47.

Wang Guiyong,Zhou Ermin,Liu Qiuhong. The configuration research based on the Plant Simulation and super efficiency DEA“water spider”[J]. Modern Manufacturing Engineering, 2018, 448(1): 40-47.

参考文献

[1] 杨建宏.精益生产实战应用[M].北京:经济管理出版社,2010.
[2] ICHIKAWA H.Simulating an applied model to optimize cell production and parts supply (Mizusumashi) for laptop assembly.Winter Simulation Conference[C].Austin,Texas:IEEE,2009.
[3] 王峰.精益生产在SSPA的应用[D].上海:上海交通大学,2010.
[4] 周尔民,王贵用,朱进,等.基于排队论的“水蜘蛛”作业系统调度与仿真[J].工业工程与管理,2016,21(1):40-49.
[5] PARUNAK H V D.Distributed AI and manufacturing control:Some issues and insights[J].Decentralized AI,1990(1):81-99.
[6] RAMOS C.An architecture and a negotiation protocol for the dynamic scheduling of manufacturing systems[C].San Diego,CA,USA:IEEE,1994.
[7] SPRUMONT F,MULLER J.Amacoia a multiagent system for designing flexible assembly lines[J].Applied Artificial Intelligence,1997,11(6):573-589.
[8] PAN J Y,TENENBAUM J M.An intelligent agent framework for enterprise integration[J].Systems,Man and Cybernetics,IEEE Transactions on,1991,21(6):1391-1408.
[9] TREBUNˇA P,KLIMENT M,EDL M,et al.Creation of Simulation Model of Expansion of Production in Manufacturing Companies[J].Procedia Engineering,2014(96):477-482.
[10] PAWLEWSKI P.Multimodal Approach to Modeling of Manufacturing Processes[J].Procedia CIRP,2014(17):716-720.
[11] KLIMENT M,POPOVI R,JANEK J.Analysis of the Production Process in the Selected Company and Proposal a Possible Model Optimization Through PLM Software Module Tecnomatix Plant Simulation[J].Procedia Engineering,2014(96):221-226.
[12] HUANG H,PEI W,WU H,et al.A research on problems of mixed-line production and the re-scheduling[J].Robotics and Computer-Integrated Manufacturing,2013,29(3):64-72.
[13] CAGGIANO A,TETI R.Modelling,Analysis and Improvement of Mass and Small Batch Production through Advanced Simulation Tools[J].Procedia CIRP,2013(12):426-431.
[14] 潘春荣,伍乃骐.晶圆重入加工的组合设备初始暂态建模和分析[J].计算机集成制造系统,2015,21(8):2072-2078.
[15] 梅江平,曹家鑫,张新,等.基于Petri网的高速机器人果奶包装生产线设计方法[J].天津大学学报(自然科学与工程技术版),2014(2):138-142.
[16] 刘雨婷,王晓东,吴建德,等.基于改进Petri网的自动化立体仓库出库系统建模[J].中南大学学报(自然科学报),2013(s1):362-366.
[17] CHARNES A,COOPER W W,RHODES E.Measuring the efficiency of decision making units[J].European journal of operational research,1978,2(6):429-444.
[18] SAHU J,MOHANTY C P,MAHAPATRA S S.A DEA Approach for Optimization of Multiple Responses in Electrical Discharge Machining of AISI D2 Steel[J].Procedia Engineering,2013(51):585-591.
[19] AMADO C A F,SANTOS S P,SEQUEIRA J F C.Using Data Envelopment Analysis to support the design of process improvement interventions in electricity distribution[J].European Journal of Operational Research,2013,228(1):226-235.
[20] LEE Z,PAI C.Operation analysis and performance assessment for TFT-LCD manufacturers using improved DEA[J].Expert Systems with Applications,2011,38(4):4014-4024.
[21] CHEN Y,CHEN B.Applying DEA,MPI,and grey model to explore the operation performance of the Taiwanese wafer fabrication industry[J].Technological Forecasting and Social Change,2011,78(3):536-546.

[22] 齐兴达,李显君,刘丝雨,等.基于数据包络分析和主成分分析的产业技术创新能力差异化研究[J].吉林大学学报(工学版),2015(3):1017-1023.
[23] 马建峰,何枫.存在中间产品退出的混合型多阶段系统DEA效率评价[J].系统工程理论与实践,2015(11):2874-2884.
[24] 陈琦,欧阳峣,徐雪松.我国钢铁企业低碳经济效率及其影响因素研究[J].系统工程理论与实践,2015(7):1896-1904.
[25] 穆鑫,程学庆,张玺,等.基于DEA交叉效率模型的铁路重载货车效率评价[J].中国铁道科学,2014(1):130-134.
[26] 王波,张群.环境约束下不同生产效率模型研究[J].系统工程理论与实践,2002,22(1):1-8.
[27] ANDERSEN P,PETERSEN N C.A procedure for ranking efficient units in data envelopment analysis[J].Management Science,1993,39(10):1261-1264.

基于Plant Simulation与超效率DEA的“水蜘蛛”配置研究

The configuration research based on the Plant Simulation and super efficiency DEA“water spider”

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	肖海宁，秦德金，武星，翟晶晶. 基于Plant Simulation的汽车内饰线运行参数优化方法研究[J]. 现代制造工程, 2020, 479(8): 1-6.
[2]	王贵用, 周尔民. 基于改进遗传算法的堆栈调度策略“水蜘蛛”路径规划[J]. 现代制造工程, 2019, 460(1): 38-42.