MBD环境下加工元的三维机加工艺设计方法

doi:10.16731/j.cnki.1671-3133.2017.09.021

现代制造工程 ›› 2017, Vol. 444 ›› Issue (9): 123-128.doi: 10.16731/j.cnki.1671-3133.2017.09.021

MBD环境下加工元的三维机加工艺设计方法

林云峰¹, 金逸林², 胡笑奇¹

1 丽水学院工学院,丽水 323000;
2 龙泉市金宏瓷业有限公司,龙泉 323700

收稿日期:2015-12-04 出版日期:2017-09-20 发布日期:2018-01-09
作者简介:林云峰,副教授,研究领域:机电一体化、CAD/CAM技术和图像处理等。金逸林,研究领域:陶瓷艺术设计,龙泉青瓷设计与制作。胡笑奇,博士,副教授。E-mail:lw1111a@163.com
基金资助:
浙江省重大科技专项项目(2014C01052,2014C01017);浙江省特色文创产品数字化设计与智能制造重点实验室(2016E1007)

A 3D process design method of machining based on MBD

Lin Yunfeng¹, Jin Yilin², Hu Xiaoqi¹

1 Engineering College,Lishui University,Lishui 323000,Zhejiang,China;
2 Longquan Jinhong Ceramics Co.Ltd., Longquan 323700,Zhejiang,China

Received:2015-12-04 Online:2017-09-20 Published:2018-01-09

摘要/Abstract

摘要： 针对目前基于模型定义(Model-Based Definition,MBD)环境下三维机加工艺设计过程中出现的信息不一致问题,在MBD加工元的概念基础上,提出基于MBD加工元的三维机加工艺设计方法和设计过程。研究基于MBD加工元的生成方法,并在此基础上研究基于MBD加工元的工艺方法决策。基于工序模型的关联复制技术和布尔运算,建立基于MBD加工元的工艺模型。开发基于MBD加工元的机加工艺设计系统,并以飞机盒类零件为例验证所提方法的有效性。

关键词: 基于模型定义, MBD加工元, 工序模型, 布尔运算

Abstract: In order to solve the problem of information inconsistencies in 3D machining process planning,a 3D process design method of machining was proposed based on Model-Based Definition (MBD).The 3D machining process planning frame based on MBD processing element were established after concept of MBD processing element was given.Processing element generating method and process decision was researched.Boolean operators and replication technology are used process model to found the process model by MBD processing element.A machining process design system was developed based MBD processing element.The effectiveness and correctness of proposed method was verified by the example of an process design for boxes parts.

Key words: Model-Based Definition (MBD), MBD processing element, process model, Boolean operators

中图分类号:

TP391.7

林云峰, 金逸林, 胡笑奇. MBD环境下加工元的三维机加工艺设计方法[J]. 现代制造工程, 2017, 444(9): 123-128.

Lin Yunfeng, Jin Yilin, Hu Xiaoqi. A 3D process design method of machining based on MBD[J]. Modern Manufacturing Engineering, 2017, 444(9): 123-128.

[1]	张胜文，陈文笛，刘星宇，张辉. 轻量化三维工序模型自动生成技术研究[J]. 现代制造工程, 2022, 499(4): 89-93.
[2]	蓝启鑫，陈彬强，何泽，姚斌，原文，付伟. 可转位刀片周边刃磨削几何仿真系统设计[J]. 现代制造工程, 2020, 482(11): 68-72.
[3]	毛贝, 刘志存, 梅中义. 基于MBD的工艺模型集成化建模与表达[J]. 现代制造工程, 2017, 440(5): 102-109.

MBD环境下加工元的三维机加工艺设计方法

A 3D process design method of machining based on MBD

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics