高弹性合金材料的微细电解铣削加工技术研究

doi:10.16731/j.cnki.1671-3133.2018.03.018

现代制造工程 ›› 2018, Vol. 450 ›› Issue (3): 99-103.doi: 10.16731/j.cnki.1671-3133.2018.03.018

高弹性合金材料的微细电解铣削加工技术研究

张长富,孙立力,郑丕显,梁若云,贠康

西安工业大学机电工程学院,西安 710021

收稿日期:2016-12-05 出版日期:2018-03-20 发布日期:2018-07-19
作者简介:张长富,博士,副教授,硕士研究生导师,主要研究方向为微细特种加工技术、精密与超精密加工技术等。 E-mail:wzhangcf@163.com
基金资助:
兵器预研支撑基金项目(62201070712);陕西省自然科学基金项目(2014JM2-5072);陕西省科技统筹项目(2014SZS20-Z02,2014SZS20-P06);陕西省教育厅重点实验室科研计划项目(13JS043)

Micro electrochemical machining for difficult-to-cut high elastic alloy

Zhang Changfu,Sun Lili,Zheng Pixian,Liang Ruoyun,Yun Kang

School of Mechatronic Engineering,Xi’an Technological University,Xi’an 710021,China

Received:2016-12-05 Online:2018-03-20 Published:2018-07-19

摘要/Abstract

摘要： 高弹性合金材料微小型零/部件在航空航天、精密仪器等领域的使用越来越广泛。针对传统方法加工高弹性合金材料微小型零件比较困难的问题,利用纳秒脉冲电源微细电解铣削加工技术对其进行了研究。介绍了微细电解铣削加工技术的原理和实验装置;研究了微细工具电极的在线制备方法和主要工艺参数对微细电解铣削加工精度的影响;并进行了两种典型微小结构的综合加工实例验证。研究表明,利用纳秒脉冲电源微细电解铣削加工技术可以加工出具有良好质量的高弹性材料微小结构。

关键词: 高弹性材料, 微细电解铣削加工技术, 微细工具电极, 纳秒脉冲电源

Abstract: Micro parts and components of high elastic alloy are widely used in industries of aeronautics and astronautics,precision devices and so on.To solve the problem that these parts and components are difficult to machine with traditional machining methods,nanosecond-pulse micro electrochemical milling machining technology was applied to machine micro parts of high elastic alloy.Firstly the principle and set-up of micro electrochemical milling machining technology were introduced.Then an online-making method for micro electrodes and effects of main process parameters on machining precision were studied.Two typical micro parts were successfully machined with this technology.Experiment results show that micro parts of high elastic material can be machined with nanosecond-pulse micro electrochemical milling machining technology,and these parts are of good quality.

Key words: high elastic material, micro electrochemical milling machining technology, micro electrode, nanosecond-pulse power

中图分类号:

TG662

张长富,孙立力,郑丕显,梁若云,贠康. 高弹性合金材料的微细电解铣削加工技术研究[J]. 现代制造工程, 2018, 450(3): 99-103.

Zhang Changfu,Sun Lili,Zheng Pixian,Liang Ruoyun,Yun Kang. Micro electrochemical machining for difficult-to-cut high elastic alloy[J]. Modern Manufacturing Engineering, 2018, 450(3): 99-103.

高弹性合金材料的微细电解铣削加工技术研究

Micro electrochemical machining for difficult-to-cut high elastic alloy

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics