温控器下壳体热流道注塑模具设计

doi:10.16731/j.cnki.1671-3133.2018.01.021

现代制造工程 ›› 2018, Vol. 448 ›› Issue (1): 109-113.doi: 10.16731/j.cnki.1671-3133.2018.01.021

温控器下壳体热流道注塑模具设计

吴晶晶,李阳,范希营,单以波

江苏师范大学机电工程学院,徐州 221116

收稿日期:2017-03-17 出版日期:2018-01-20 发布日期:2018-07-24
作者简介:吴晶晶,本科生。范希营,通信作者,教授,硕士生导师。主要从事工艺装备方面的研究,获省级科技进步一等奖等省级奖项5项,发表SCI/EI论文三十余篇。E-mail:1935500943@qq.com;fxy8441@163.com
基金资助:
江苏省产学研前瞻性联合研究项目(BY2016028-02);徐州市科技计划资助项目(KC16SG277);江苏省高等学校大学生创新创业训练计划项目(201610320097X)

The design of injection mold for thermostat lower casing with hot runner technology

Wu Jingjing,Li Yang,Fan Xiying,Shan Yibo

College of Mechanical and Electrical Engineering,Jiangsu Normal University, Xuzhou 221116,Jiangsu,China

Received:2017-03-17 Online:2018-01-20 Published:2018-07-24

摘要/Abstract

摘要： 温控器下壳体存在翘曲变形、收缩不均等问题。针对这些问题,基于Moldflow软件与Pro/E软件对温控器下壳体建立三维模型和型腔设计,并利用EMX外挂工具进行模架添加,完成塑件的热流道注射模具设计。热流道技术及结构创新设计的有效结合能够使模具结构合理、布局紧凑,获得更佳的成型质量。

关键词: 温控器, 注塑模具, 热流道技术, Moldflow

Abstract: Thermostat lower casing have many problems,like buckling deformation,unequal shrinkage and so on.To solve these problems,use the Pro/E software and the Moldflow software to establish 3D models and make cavity design of the thermostat lowering casing.Moreover,EMX is applied for formwork addition to accomplish the design of hot runner injection mold.The effective combination of structure of innovative design and hot runner technology could streamline the mold structure and compact the layout structure to result in a better forming quality.

Key words: thermostat, injection mold, hot runner technology, Moldflow

中图分类号:

TG391.72

吴晶晶,李阳,范希营,单以波. 温控器下壳体热流道注塑模具设计[J]. 现代制造工程, 2018, 448(1): 109-113.

Wu Jingjing,Li Yang,Fan Xiying,Shan Yibo. The design of injection mold for thermostat lower casing with hot runner technology[J]. Modern Manufacturing Engineering, 2018, 448(1): 109-113.

温控器下壳体热流道注塑模具设计

The design of injection mold for thermostat lower casing with hot runner technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics