VSSCL均值控制图和预防维修策略联合经济设计

doi:10.16731/j.cnki.1671-3133.2017.09.026

现代制造工程 ›› 2017, Vol. 444 ›› Issue (9): 150-156.doi: 10.16731/j.cnki.1671-3133.2017.09.026

• 设备设计/诊断维修/再制造 • 上一篇下一篇

VSSCL均值控制图和预防维修策略联合经济设计

陈洪根

郑州航空工业管理学院管理工程学院,郑州 450015

收稿日期:2016-03-16 出版日期:2017-09-20 发布日期:2018-01-09
作者简介:陈洪根,博士,副教授,主要研究方向为质量与可靠性工程。E-mail:microwr@163.com
基金资助:
国家自然科学基金项目(U1404702,U1204702);航空科学基金项目(2014ZG55021, 2016ZG55021);河南省教育厅人文社会科学研究项目(2014-ZD-010,2018-ZZJH-598);河南省科技厅科技攻关项目(172102210531)

Joint economic design for VSSCL X-bar control chart and preventive maintenance policies

Chen Honggen

School of Management Engineering,Zhengzhou University of Aeronautics,Zhengzhou 450015,China

Received:2016-03-16 Online:2017-09-20 Published:2018-01-09

摘要/Abstract

摘要： 针对输出质量特性服从正态分布的随机偏移单部件可修系统,研究了可变样本容量和控制线(Variable Sampling Size and Control Limits,VSSCL)均值控制图和预防维修策略联合经济设计问题。首先,构建了VSSCL均值控制图和预防维修策略联合经济设计的集成框架,揭示控制图和预防维修策略运行的耦合机制;然后,基于VSSCL均值控制图和系统状态特征参数,针对给出的集成框架确定了可能形成系统更新的四个维修事件的发生概率,并进一步利用更新过程理论和全概率公式,建立了VSSCL均值控制图和预防维修策略联合经济设计的平均单位时间成本最小决策模型;同时,针对具体实例,将构建的联合设计决策模型和独立设计决策模型进行比较分析,结果表明联合设计决策模型具有明显的经济优势;最后,利用回归正交试验设计方法对模型参数的灵敏度进行了分析。

关键词: 单部件可修系统, VSSCL均值控制图, 预防维修策略, 联合经济设计

Abstract: For one unit repairable system having a normal distribution of products quality failure,considering random shift,a joint economic design approach to Variable Sampling Size and Control Limits(VSSCL) X-bar control chart and preventive maintenance policies is discussed.Firstly,an integrated frame structure on VSSCL X-bar control chart and preventive maintenance policies is developed to reveal the running coupling mechanism between control chart and preventive maintenance policies.Secondly,for the integrated frame structure,probabilities models of four repair events which can lead to system renew are given based on VSSCL X-bar control chart and the system condition characteristic parameters.Then,a mathematical decision model on joint economic design for dynamic SPC and preventive maintenance policies is presented to find the minimization average cost per unit time according to renew theory and the law of total probability decomposition,and a comparison shows that the proposed joint economic design model has a lower average cost per unit time than previous independent economic design model.Finally,a sensitivity analysis for model parameters was conducted by using orthogonal regression design.

Key words: one unit repairable system, VSSCL X-bar control chart, preventive maintenance, joint economic design

中图分类号:

TB114
TH17

陈洪根. VSSCL均值控制图和预防维修策略联合经济设计[J]. 现代制造工程, 2017, 444(9): 150-156.

Chen Honggen. Joint economic design for VSSCL X-bar control chart and preventive maintenance policies[J]. Modern Manufacturing Engineering, 2017, 444(9): 150-156.

参考文献

[1] PANDEY D,KULKARNI M S,VRAT P.Joint consideration of production scheduling,maintenance and quality policies:A review and conceptual framework[J].International Journal of Advanced Operations Management,2010,2(1):1-24.
[2] CASSADY C R,BOWDEN R O,LIEW L,et al.Combining preventive maintenance and statistical process control:a preliminary investigation[J].IIE Transactions,2000,32(6):471-478.
[3] TAGARAS G.An integrated cost model for the joint optimization of process control and maintenance[J].Journal of the Operational Research Society,1988,39(8):757-766.
[4] CASSADY C R,BOWDEN R O,LIEW L,et al.Combining preventive maintenance and statistical process control:a preliminary investigation[J].IIE Transactions,2000,32(6):471-478.
[5] BEN-DAYA M,RAHIM M A.Effect of maintenance on the economic design of control chart[J].European Journal of Operational Research,2000,120 (1):131-143.
[6] YEUNG T G,CASSADY C R,SCHNEIDER K.Simultaneous optimization of X-bar control chart and age-based preventive maintenance policies under an economic objective[J].IIE Transactions,2008,40 (2):147-159.
[7] 张斌,周伟灿,杨洲木,等.非正态总体控制图和预防维修策略耦合优化的研究[J].数理统计与管理,2012,31(5):857-862.
[8] LINDERMAN K,MCKONE-SWEET K E,ANDERSON J C.An integrated systems approach to process control and maintenance[J].European Journal of Operational Research,2005,164(2):324-340.
[9] MEHRAFROOZ Z,NOOROSSANA R.An integrated model based on statistical process control and maintenance[J].Computers & Industrial Engineering,2011,61(4):1245-1255.
[10] CHARONGRATTANASAKUL P,PONGPULLPONSAK A.Minimizing the cost of integrated systems approach to control and maintenance model by EWMA control chart using genetic algorithm[J].Expert Systems with Applications,2011,38(5):5178-5186.
[11] 仲建兰,马义中,刘利平.两阶段串联可修系统的统计过程控制与视情维修整合研究[J].系统工程理论与实践,2014,34(9):2339-2349.
[12] 仲建兰,马义中.面向小批量生产过程的两阶段串联系统SPC与维修策略整合优化[J].计算机集成制造系统,2014,20(8):1959-1968.
[13] MORALES S O C.Economic statistical design of integrated X-bar-S control chart with preventive maintenance and general failure distribution[J].PLoS One,2013,8(3):1-25.
[14] LIU L,YU M,MA Y,et al.Economic and economic-statistical designs of a control chart for two-unit series systems with condition-based maintenance[J].European Journal of Operational Research,2013,226(3):491-499.
[15] XIANG Y.Joint optimization of control chart and preventive maintenance policies:A discrete-time Markov chain approach[J].European Journal of Operational Research,2013,229(2):382-390.
[16] WANG W.Maintenance models based on the np control charts with respect to the sampling interval[J].Journal of the Operational Research Society,2011,62(1):124-133.
[17] YIN Z,MAKIS V.Economic and economic-statistical design of a multivariate Bayesian control chart for condition-based maintenance[J].IMA Journal of Management Mathematics,2011,22(1):47-63.
[18] WANG W.A simulation-based multivariate Bayesian control chart for real time condition-based maintenance of complex systems[J].European Journal of Operational Research,2012,218(3):726-734.
[19] PANAGIOTIDOU S,TAGARAS G.Optimal integrated process control and maintenance under general deterioration[J].Reliability Engineering & System Safety,2012,104(8):58-70.
[20] 郭志芳.动态X-bar控制图的研究及其应用[M].北京:知识产权出版社,2014.

VSSCL均值控制图和预防维修策略联合经济设计

Joint economic design for VSSCL X-bar control chart and preventive maintenance policies

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

[1]	陈洪根;李诗宇;闫鑫;李婧;张艳. 基于可用度的预防维修和均值控制图联合优化模型[J]. 现代制造工程, 2022, 497(2): 1-9.
[2]	王辉,程文明,翟守才,彭奇慧. 基于IPTO算法的连续体结构可靠性拓扑优化[J]. 现代制造工程, 2021, 495(12): 105-111.
[3]	陈洪根,闫鑫,张艳,牛小娟. 生产系统维修管理-统计过程控制-经济生产批量集成优化研究综述[J]. 现代制造工程, 2020, 481(10): 148-155.
[4]	姚灿江,魏领会,王海龙. 基于FTA和FMEA的RV减速器可靠性分析[J]. 现代制造工程, 2018, 448(1): 136-140.
[5]	池阔, 康建设, 王广彦, 吴坤. 基于改进CS的混合威布尔分布最优化参数估计[J]. 现代制造工程, 2017, 439(4): 149-154.