现代制造工程 ›› 2018, Vol. 451 ›› Issue (4): 148-152.doi: 10.16731/j.cnki.1671-3133.2018.04.028

• 设备设计/诊断维修/再制造 • 上一篇    下一篇

基于晶闸管变流器的新型双闭环控制策略

杜庆楠, 李坡   

  1. 河南理工大学电气工程与自动化学院, 焦作 454000
  • 收稿日期:2016-11-04 出版日期:2018-04-20 发布日期:2018-07-18
  • 作者简介:杜庆楠, 硕士, 教授, 硕士研究生导师, 主要研究方向为电力电子技术、交直流调速。李坡, 硕士研究生, 主要研究方向为运动驱动与控制。E-mail:lipofish@163.com

A novel dual-loop control strategy based on the thyristor converter

Du Qingnan, Li Po   

  1. College of Electrical Engineering and Automation, Henan Polytechnic University, Jiaozuo 454000, Henan, China
  • Received:2016-11-04 Online:2018-04-20 Published:2018-07-18

摘要: 为了降低成本、改善调速系统的闭环特性, 提出了在晶闸管为变流器件下的一种新型双闭环控制策略。在转速反馈闭环控制的基础上, 引入有功电流环, 通过频率、电压两个变量的协调控制来实现双闭环调速。分析电动机有功电流特性, 根据实验数据, 通过拟合得到转差与有功电流的关系。并由双变量交-交变频的特点, 在充分利用电动机的过载能力的条件下, 确定调速方案。通过Matlab软件仿真和ARM驱动实验, 验证了交-交变频双闭环调速方案的可行性和有效性。

关键词: 晶闸管, 变流器, 有功电流, 双闭环控制

Abstract: With the purpose of reducing costs and improving the properties of the closed-loop speed control system, presents a new dual-loop control strategy based on the thyristor converter.The added active current closed loop on the basis of feedback loop speed control, by frequency, voltage coordinated control to achieve double-loop speed control.Analysis of motor active current characteristics according to the experimental data, obtained by fitting the slip and active current relationship.By bivariate alternating conversion frequency characteristics, in making full use of the motor overload conditions, determine speed program.Simulations with Matlab and experiment results with ARM, are presented to verify the feasibility and effectiveness of alternating conversion frequency dual-loop speed control program.

Key words: thyristor, converter, active current, dual-loop control

中图分类号: 


版权所有 © 《现代制造工程》编辑部 
地址:北京市东城区东四块玉南街28号 邮编:100061 电话:010-67126028 电子信箱:2645173083@qq.com
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn
访问总数:,当日访问:,当前在线: