基于CT重建和机器人磨削的个性化假体CAD/CAM方法

doi:10.16731/j.cnki.1671-3133.2017.04.013

现代制造工程 ›› 2017, Vol. 439 ›› Issue (4): 67-72.doi: 10.16731/j.cnki.1671-3133.2017.04.013

基于CT重建和机器人磨削的个性化假体CAD/CAM方法

李晴¹, 王世明¹, 吴琪², 庞浜³, 管晓东³, 席文明³, 高亢⁴

1上海海洋大学工程学院,上海 201306
2 中国人民解放军第82医院,淮安 223001
3 厦门大学航空航天学院,厦门361005
4 南京以琳水务科技有限公司,南京 210011

收稿日期:2016-03-08 出版日期:2017-04-18 发布日期:2018-01-09
作者简介:李晴,硕士研究生。
E-mail:18801771885@163.com

A CAD/CAM method of individualized prosthesis base on CT reconstructing and robot grinding

Li Qing¹, Wang Shiming¹, Wu Qi², Pang Bang³, Guan Xiaodong³, Xi Wenming³, Gao Kang⁴

1 College of Engineering Science and Technology,Shanghai Ocean University,Shanghai 201306,China
2 The 82 Hospital of People’s Liberation Army,Huaian 223001,Jiangsu,China
3 School of Aerospace Engineering,Xiamen University,Xiamen 361005,Fujian,China
4 Nanjing Yilin Water Science and Technology Co.Ltd.,Nanjing 210011,China

Received:2016-03-08 Online:2017-04-18 Published:2018-01-09

摘要/Abstract

摘要： 人体髋关节髓腔具有个性化的S型形状,现有标准型的直柄股骨假体与病人髓腔形成三点接触,降低了股骨假体与病人髓腔的匹配度。利用猪腿骨的CT数据重建其髓腔的三维模型,将该三维模型作为假体设计模型导入机器人仿真软件进行编程和磨削仿真,并生成机器人磨削程序,利用机器人磨削程序将该假体模型复制到铜棒上。将加工好的假体与猪腿骨髓腔匹配,通过X射线图检测两者匹配情况,利用截取的骨断面测量假体与髓腔断面间的尺寸误差,验证个性化假体设计方法以及机器人磨削个性化假体的可行性。实验结果表明,假体与髓腔完成匹配后,90.84%匹配区域的假体与髓腔的间隙小于1mm。

关键词: CT, 重建, 假体, 机器人磨削

Abstract: Human hip joint has a S-shaped canal,the existing standard straight hip prosthesis matching with the femur cavity of the patient,will form a three-point contact and reduce the fit precision between hip prosthesis and femur cavity.The pig shank CT data is applied to reconstruct the three-dimensional model of femur cavity to as a design model of the prothesis,which is imported into robot simulation software for programming and simulation of grinding,then,the prosthesis model is copied on the copper bar by using robotic grinding technology.After the prosthesis matched with femur cavity,the matching case is detected by X-ray image,and the size error between the prosthesis and femur cavity on the cross-sectional is measured to verify the method of individualized prosthesis design and the feasibility of robot grinding prosthesis.The experimental results show that 90.84% of the matching area is less than 1mm when the femur cavity is matched with prosthesis.

Key words: CT, reconstructing, prosthesis, robot grinding

中图分类号:

TP249

李晴, 王世明, 吴琪, 庞浜, 管晓东, 席文明, 高亢. 基于CT重建和机器人磨削的个性化假体CAD/CAM方法[J]. 现代制造工程, 2017, 439(4): 67-72.

Li Qing, Wang Shiming, Wu Qi, Pang Bang, Guan Xiaodong, Xi Wenming, Gao Kang. A CAD/CAM method of individualized prosthesis base on CT reconstructing and robot grinding[J]. Modern Manufacturing Engineering, 2017, 439(4): 67-72.

参考文献

[1] SAKAI R,ITOMAN M,MABUCHI K.Assessments of different kinds of stems by experiments and FEM analysis:appropriate stress distribution on a hip prosthesis[J].Clinical Biomechanics,2006(21):826-833.
[2] RUBEN R B,FOLGADO J,FEMANDES P R.Three-dimensional shape optimization of hip prostheses using a multicriteria formulation[J].Struct.Multidisc.Optim.,2007(34):261-275,.
[3] RAHMATI S,FARAHMAND F,ABBASZADEH F.Application of rapid prototyping for development of custom-made orthopedics prostheses:an investigative study[J].MAJLESI JOURNAL of MECHANICAL ENGINEERING,2010,3(2):11-16.
[4] KHANUJA H S,VAKILJ J,GODDARD M S,et al.Cementless femoral fixation in total hip arthroplasty [J].The journal of bone and joint surgery,2011(13):500-509.
[5] 谭瑞昌,范红松,吴方,等.齿槽型人工髋关节骨应力分布的三维有限元分析[J].生物医学工程杂志,2011,23(4):732-736.
[6] MITTELSTADT B,PAUL H,KAZANZIDES P,et al.Development of a surgical robot for cementless total hip replacement[J].Robotica,1993(11):553-560.
[7] 史庆轩,李佩佳,孙磊,等.662髋Ribbed假体中远期临床疗效观察[J].中国矫形外科杂志,2007,21(3):244-246.
[8] 林均馨,张鹏,刘玉江,等.148髋Ribbed假体全髋关节置换的临床研究[J].中国骨与关节外科,2010,3(1):57-58.
[9] 雷光华,曾凯斌,李康华,等.解剖型非骨水泥全髋人工假体置换术近中期疗效研究[J].中国修复重建外科杂志,2007,21(3):244-246.
[10] 王敏,张峡,郝勇,等.解剖型股骨柄假体植入并发股骨近段骨折与股骨近段髓腔解剖分析[J].第三军医大学学报,2011,33(14):1522-1525.
[11] PAWLIKOWSKI M,SKALSKI K,HARABURDA M.Process of hip joint prosthesis design including bone remodeling phenomenon[J].Computers and structures,2003(81):887-893.
[12] WEI Z J,FAN L,RONG D Q,et al.Computer-assisted design of individualized femoral prosthesis according to 3D reconstruction of CT images[J].Journal of Clinical Rehabilitative Tissue Engineering Research,2010,14(35):6639-6642.
[13] PAUL H A,MITTLESTADT B,BARGAR W L,et al.A surgical robot for total hip replacement surgery.Proceedings of the 1992 IEEE international conference on robotics and automation[C].Nice,France:[s.n.],1992:606-611.
[14] TAYLOR R H,MITTELSTADT B D,PAUL H A,et al.An image-directed robotic system for precise orthopaedic surgery[J].IEEE transactions on robotics and antomation,1994,10(3):261-275.
[15] LEE Jeng-Nan,CHANG Kuan-Yu.An integrated investigation of CAD/CAM for the development of custom-made femoral stem[J].Life Science Journal,2009,7(1):56-61.
[16] RAWAL B R,RIBEIRO R,MALHOTRA R,et al.Design and manufacturing of femoral stem for the indian population[J].Jounal of Manufacturing Processes,2012(14):216-223.
[17] WERNER A,LECHNIAK Z,SKALSKI K,et al.Design and manufacture of anatomical hip joint endoprostheses using CAD/CAM systems[J].Journal of Materials Processing Technology,2000(107):181-186.

基于CT重建和机器人磨削的个性化假体CAD/CAM方法

A CAD/CAM method of individualized prosthesis base on CT reconstructing and robot grinding

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

[1]	王稳，李维. 考虑接触特性的滚动轴承系统建模与仿真分析[J]. 现代制造工程, 2020, 474(3): 72-76.
[2]	易锋,胡国良,梅鑫,邓英俊. 磁流变假肢膝关节CT+PD轨迹跟踪控制研究[J]. 现代制造工程, 2020, 481(10): 108-113.
[3]	蔡佩松. 基于逆向工程的汽车覆盖件模具修复[J]. 现代制造工程, 2018, 453(6): 153-156.
[4]	于天彪,孙雪,哈达. 基于逆向工程和UG二次开发的人工骨组织结构造型仿真[J]. 现代制造工程, 2018, 450(3): 154-159.
[5]	姚远, 刘志刚. 基于Kinect的三维重建与点云雕刻的实现[J]. 现代制造工程, 2017, 439(4): 128-132.