基于有序聚类的机床热误差测点优化

doi:10.16731/j.cnki.1671-3133.2018.04.020

现代制造工程 ›› 2018, Vol. 451 ›› Issue (4): 108-114.doi: 10.16731/j.cnki.1671-3133.2018.04.020

基于有序聚类的机床热误差测点优化

魏弦

攀枝花学院, 攀枝花 617000

收稿日期:2017-02-12 出版日期:2018-04-20 发布日期:2018-07-18
通讯作者: 国家自然科学基金项目(51605381);四川省科技厅科技支撑计划项目(2016GZ0205);四川省教育厅重点项目(16ZA0415);攀枝花学院博士基金项目(BKQJ2017007)
作者简介:魏弦, 副教授, 博士研究生, 从事机床精度控制研究。E-mail:110801844@qq.com

Optimizing of CNC machine tool temperature measuring points based on sequential cluster method

Wei Xian

Panzhihua University, Panzhihua 617000, Sichuan, China

Received:2017-02-12 Online:2018-04-20 Published:2018-07-18

摘要/Abstract

摘要： 温度测点的选择直接影响数控机床热误差补偿模型的性能。考虑到温度有序传递的特点, 提出了有序聚类测点优化的方法。以试验数据为基础, 计算类直径并比较目标误差函数;然后对温度变量分类, 确定最佳分类数;通过计算热误差和温度之间的相关系数, 确定最优测点。采用定位误差分解建模法结合选取的最优测点建立热误差预测模型, 分别与模糊聚类和变量分组测点优化建立的模型进行比较, 试验结果表明, 有序聚类测点优化法精度较高, 具有一定的应用前景。

关键词: 数控机床, 热误差, 测点优化, 有序聚类, 热误差补偿

Abstract: The performance of CNC machine tool thermal error compensation model is affected directly by the selection of temperature sensor placement.An optimizing method of sensor selected by sequential cluster is proposed, given that the characteristic temperature is transferred in order.Based on experiment data, classification diameters are calculated and their objective function are compared.Then the optimizing classification number and optimizing sensor placement are determined by the calculation of correlation coefficient between thermal error and temperature value.Thermal error prediction model is established with a position error modelling method and the selected points.In comparison with models established by fuzzy cluster and variable grouping, the results show the proposed method can accurately predict and has potential application prospect.

Key words: CNC machine tool, thermal error, measuring points optimizing, sequential cluster, thermal error compensation

中图分类号:

TG502.15

魏弦. 基于有序聚类的机床热误差测点优化[J]. 现代制造工程, 2018, 451(4): 108-114.

Wei Xian. Optimizing of CNC machine tool temperature measuring points based on sequential cluster method[J]. Modern Manufacturing Engineering, 2018, 451(4): 108-114.

[1]	王毅，李波，温鹏，李军. 数控机床高频信号高精度数据采集系统设计[J]. 现代制造工程, 2022, 499(4): 134-142.
[2]	陈勇将，王二化，郭魂，华洪良，刘宵阳. 基于虚拟材料方法的龙门数控机床动态特性影响机制分析[J]. 现代制造工程, 2021, 489(6): 135-141.
[3]	张洪强，张雪娜，程相文，韩倩. 数控机床RS-232串口转TCP/IP网口技术研究[J]. 现代制造工程, 2021, 486(3): 72-75.
[4]	黄聿山,陈吉红,陈宇,许光达. 考虑电控数据的LSTM神经网络进给轴热误差建模[J]. 现代制造工程, 2021, 493(10): 25-32.
[5]	赵家黎, 黄利康, 李桥林. 基于卡尔曼滤波的数控机床主轴热误差建模研究[J]. 现代制造工程, 2018, 454(7): 23-26.
[6]	余文利, 姚鑫骅. 改进混沌粒子群优化的灰色系统模型在机床热误差建模中的应用[J]. 现代制造工程, 2018, 453(6): 101-107.
[7]	沈振辉, 杨拴强. 基于模糊聚类及相关性分析的温度测点布置优化方法研究[J]. 现代制造工程, 2018, 458(11): 112-118.

基于有序聚类的机床热误差测点优化

Optimizing of CNC machine tool temperature measuring points based on sequential cluster method

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 7

编辑推荐

Metrics