差动驱动机械手结构设计及抓取形态研究*

doi:10.16731/j.cnki.1671-3133.2024.11.010

现代制造工程 ›› 2024, Vol. 530 ›› Issue (11): 73-79.doi: 10.16731/j.cnki.1671-3133.2024.11.010

差动驱动机械手结构设计及抓取形态研究^*

王炳昊, 孙龙飞

沈阳理工大学机械工程学院,沈阳 110159

收稿日期:2023-12-25 出版日期:2024-11-18 发布日期:2024-11-29
通讯作者: 孙龙飞,博士,副教授,主要研究方向为机器人机构学、机器人变刚度拟人仿生设计、软体机器人设计与控制和自动化装备及智能控制。E-mail:lfsun_neu@163.com
作者简介:王炳昊,硕士研究生,主要研究方向为机器人机构学。E-mail:wbh1473@163.com
基金资助:
^*辽宁省教育厅面上项目(JYTMS20230200);辽宁省博士科研启动基金计划项目(2021-BS-160);沈阳理工大学引进高层次人才科研支持经费项目(1010147000821)

Structural design and grasping morphology study of differential drive manipulator

WANG Binghao, SUN Longfei

School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,China

Received:2023-12-25 Online:2024-11-18 Published:2024-11-29

摘要/Abstract

摘要： 为了解决传统欠驱动机械手仅能被动适应抓取物体形态的问题,提出了一种基于绳索与形状记忆合金(SMA)弹簧的差动驱动机械手,可以根据被抓取物体特征主动控制手指的抓取形态,更符合人类手部的抓握特点。采用D-H法建立手指的运动学模型,分析了手指的工作空间;根据力矩平衡原理建立了机械手的静力学模型,阐明了驱动绳索的驱动力、手指关节等效刚度对抓取形态的影响规律,并通过ADAMS仿真对理论分析结果进行验证;最后,对样机进行试验测试,研究结果表明,根据物体的轮廓大小,通过主动控制机械手绳索驱动力与手指关节的等效刚度,可以完成包络、捏取等典型的抓取动作,进而实现对不同形状、尺寸物体的稳定抓取。

关键词: 机械手, 抓取形态, 差动驱动, SMA弹簧, 运动学

Abstract: In order to solve the problem that traditional underdriven manipulators can only passively adapt to the morphology of grasping objects,a rope and Shape Memory Alloy (SMA) spring-based differential drive manipulator was proposed,which can actively control the grasping morphology of the fingers according to the characteristics of the objects to be grasped,and is more in line with the grasping characteristics of the human hand. The kinematic model of the finger was developed using the D-H method and the workspace of the finger was analyzed;the static mechanical model of the manipulator was established according to the principle of moment equilibrium,and the influence laws of the driving force of the drive rope and the equivalent stiffness of the finger joints on the grasping pattern were elucidated,and the results of the theoretical analysis were verified by ADAMS simulation;finally,the prototype was tested experimentally,and the research results show that according to the contour size of the object,the typical grasping actions such as enveloping and pinching can be accomplished by actively controlling the driving force of the drive rope and the equivalent stiffness of the finger joints,so as to realize the stable grasping of objects of different shapes and sizes.

Key words: manipulators, grasping pattern, differential drive, SMA spring, kinematics

中图分类号:

TP241

王炳昊, 孙龙飞. 差动驱动机械手结构设计及抓取形态研究^*[J]. 现代制造工程, 2024, 530(11): 73-79.

WANG Binghao, SUN Longfei. Structural design and grasping morphology study of differential drive manipulator[J]. Modern Manufacturing Engineering, 2024, 530(11): 73-79.

参考文献

[1] YOON D,CHOI Y.Underactuated finger mechanism using contractible slider-cranks and stackable four-bar linkages[J].IEEE/ASME Transactions on Mechatronics,2017,22(5):2046-2057.
[2] DESHPANDE A D,XU Z,WEGHE M J V,et al.Mechanisms of the anatomically correct testbed hand[J].IEEE/ASME Transactions on Mechatronics,2011,18(1):238-250.
[3] YAMANO I,MAENO T.Five-fingered robot hand using ultrasonic motors and elastic elements[C]//Proceedings of the 2005 IEEE International Conference on Robotics and Automation.Piscataway:IEEE,2005:2673-2678.
[4] 马涛,杨冬,赵海文,等.一种新型欠驱动机械手爪的抓取分析和优化设计[J].机器人,2020,42(3):354-364.
[5] CONTROZZI M,CLEMENTE F,BARONE D,et al.The SSSA-MyHand:a dexterous lightweight myoelectric hand prosthesis[J].IEEE Transactions on Neural Systems and Rehabilitation Engineering,2016,25(5):459-468.
[6] REN Z,ZHOU C,XIN S,et al.HERI hand:a quasi dexterous and powerful hand with asymmetrical finger dimensions and underactuation[C]//IEEE/RSJ International Conference on Intelligent Robots and Systems.Piscataway:IEEE,2017:322-328.
[7] 梁达尧,张文增.平夹自适应欠驱动手的参数优化与稳定性分析[J].机器人,2017(3):283-291.
[8] MITSUI K,OZAWA R,KOU T.An under-actuated robotic hand for multiple grasps[C]//2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.Piscataway:IEEE,2013:5475-5480.
[9] ROELS E,TERRYN S,BRANCART J,et al.A multi-material self-healing soft gripper[C]//2019 2nd IEEE International Conference on Soft Robotics (RoboSoft).Piscataway:IEEE,2019:316-321.
[10] JIN Y,CHENG S,YUAN Y,et al.Anthropomorphic hand based on twisted-string-driven da Vinci′s mechanism for approaching human dexterity and power of grasp[J].Journal of Zhejiang University-SCIENCE A,2022,23(10):771-782.
[11] 张祥,苏衍宇,王伟东,等.一种平面混合驱动夹持器的结构优化设计[J].机器人,2016,38(3):344-351.
[12] FIROUZEH A,PAIK J.Grasp mode and compliance control of an underactuated origami gripper using adjustable stiffness joints[J].IEEE/ASME Transactions on Mechatronics,2017,22(5):2165-2173.
[13] 胡永赞,胡凯,吴佳胜,等.刚柔耦合机器人综述[J].南京信息工程大学学报(自然科学版),2022,14(3):304-316.
[14] 田加文,王田苗,史震云,等.仿象鼻机械臂的运动学分析及实验[J].机器人,2017,39(5):585-594.
[15] 张作龙,刘永红,杨毅,等.形状记忆合金弹簧变形速度的研究[J].石油大学学报(自然科学版),2000,24(2):95-97.
[16] OTSUKA K,KAKESHITA T.Science and technology of shape-memory alloys:new developments[J].MRS BULLETIN,2002,27(2):91-100.
[17] LIU Y,GE Z,YANG S,et al.Elephant′s trunk robot:an extremely versatile under-actuated continuum robot driven by a single motor[J].Journal of Mechanisms and Robotics,2019,11(5):051008.

差动驱动机械手结构设计及抓取形态研究^*

Structural design and grasping morphology study of differential drive manipulator

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	张俊, 胡俊峰. 基于视觉的软体机器人位姿测量与控制^*[J]. 现代制造工程, 2024, 524(5): 39-47.
[2]	吴迎春, 白永明, 沈建新. 复合加工机床空间误差补偿和精度提升^*[J]. 现代制造工程, 2024, 524(5): 104-112.
[3]	赵佳伟, 李卫东, 周勇, 胡吉全. 铣削加工机器人旋量建模及几何求逆优化^*[J]. 现代制造工程, 2024, 523(4): 66-72.
[4]	张凤鑫, 孙振兴. 末端牵引式上肢外骨骼结构设计与运动学分析^*[J]. 现代制造工程, 2024, 521(2): 120-127.
[5]	王笑;王磊. 基于新几何子问题的6R机械臂逆运动学分析[J]. 现代制造工程, 2023, 514(7): 45-53.
[6]	宗泽;张磊;贾志煦;章悦;陆观. 一种具有良好灵巧性和触觉估计的三指机械手[J]. 现代制造工程, 2023, 514(7): 54-62.
[7]	王立杰，岳侗，李明杰，张国庆. 一种带块式指节限位机构模块化机械手的研究[J]. 现代制造工程, 2023, 513(6): 33-38.
[8]	徐巍，朱怀志，钟宇超，余成成. 基于NSGA-Ⅱ的热压系统上下料机械手结构优化设计[J]. 现代制造工程, 2023, 512(5): 65-73.
[9]	任文硕;邢关生. 全向移动机械臂的混合视觉伺服与参数优化[J]. 现代制造工程, 2023, 511(4): 59-68.
[10]	杨勇，陈文俊，谢玲，曾梦圆，陈辉荣，黄福. 电子纱全自动生产线设计及其应用[J]. 现代制造工程, 2023, 519(12): 148-154.
[11]	孙立新，耿庆琳，唐家豪，高春艳，张明路. 存在关节限位的冗余机械臂逆运动学研究[J]. 现代制造工程, 2022, 503(8): 46-52.
[12]	徐志强;邓援超;谢鼎越. 自动装车机码包机构的优化设计与仿真分析[J]. 现代制造工程, 2022, 505(10): 107-112.
[13]	姚卓，张奇峰，霍良青，翟宝琦，刘涛. 深海液压机械手连杆参数优化研究[J]. 现代制造工程, 2021, 491(8): 40-47.
[14]	郭一典，霍良青，张奇峰，孙斌. 水下欠驱动机械手结构设计与仿真分析[J]. 现代制造工程, 2021, 491(8): 48-55.
[15]	郭岩宝，王斌，王德国，于海德，周玄黎，尹铁，周伦. 焊接机器人的研究进展与发展趋势[J]. 现代制造工程, 2021, 488(5): 53-63.