基于油液监测技术的齿轮箱运行状态模糊综合评价

doi:10.16731/j.cnki.1671-3133.2017.11.005

现代制造工程 ›› 2017, Vol. 446 ›› Issue (11): 22-28.doi: 10.16731/j.cnki.1671-3133.2017.11.005

基于油液监测技术的齿轮箱运行状态模糊综合评价

张宇翔^1,2,3, 宣征南^1,2, 孙志伟^1,2, 张铱鈖³

1 广东石油化工学院机电工程学院,茂名 525000;
2 广东石油化工学院广东省石化装备故障诊断重点实验室,茂名 525000;
3 太原理工大学化学化工学院,太原 030024

收稿日期:2016-06-29 出版日期:2017-11-20 发布日期:1900-01-01
作者简介:张宇翔,硕士研究生。 E-mail:17724131405@163.com
基金资助:
国家自然基金项目(61174113);广东省高校石油化工过程装备故障诊断与信息化控制工程技术开发中心开放基金项目(512015);广东省石化装备故障诊断重点实验室开放课题项目(GDUPTKLAB201607);茂名市科技计划项目(201612)

Fuzzy comprehensive evaluation for gear box running status based on oil monitoring

Zhang Yuxiang^1,2,3, Xuan Zhengnan^1,2, Sun Zhiwei^1,2, Zhang Yifen³

1 College of Mechanical and Electrical Engineering,Guangdong University of Petrochemical Technology,Maoming525000,Guangdong,China;
2 Guangdong Provincial Key Laboratory of Petrochemical Equipment FaultDiagnosis,Guangdong University of Petrochemical Technology,Maoming 525000,Guangdong,China;
3 College of Chemistry and Chemical Engineering,Taiyuan University of Tcehnology,Taiyuan 030024,China

Received:2016-06-29 Online:2017-11-20 Published:1900-01-01

摘要/Abstract

摘要： 针对齿轮箱运行状况和油液监测技术的特点,提出了一种模糊层析综合评价方法。提取铁谱磨粒量化指标和理化分析指标,构建综合评价指标体系;采用熵权法和层次分析法确定各指标的主、客观权重,并通过乘法集成法进行组合赋权。建立目标层与二级评价层间的隶属关系,应用隶属度加权逐层实现综合评价,在确定总体结论时引入距离分析方法,由相对贴近度最终确定状态评价。通过对自行搭建的实验机组进行监测评价,其结果与实际工况相符,验证了该方法的全面性与合理性。

关键词: 齿轮箱, 油液监测, 磨粒, 理化分析, 模糊综合评价

Abstract: Based on the running status of gear box and the character of oil monitoring,the method was proposed which combine fuzzy comprehensive evaluation with Analytic Hierarchy Process(AHP).By extracting the indicators of the quantifier of wear particle and physical and chemical analysis, establish the comprehensive evaluation index system;using entropy weight method and AHP to determine the subjective and objective weight,then the combination weighting was obtained in multiplicative integration method.The membership function was established between aim level and the second level of evaluation,and use the membership of weighted to come ture comprehensive evaluation.Applying the distance analysis method to determine the overall conclusion,and then get the final evaluation result by relative degree.By means of the monitoring to experiment unit which was constructed by ourselves,the evaluation result consistent with the fact status,and then validating the comprehensiveness and rationality of this method.

Key words: gear box, oil monitoring, wear particle, physicochemical analysis, fuzzy comprehensive evaluation

中图分类号:

TH117.2

张宇翔, 宣征南, 孙志伟, 张铱鈖. 基于油液监测技术的齿轮箱运行状态模糊综合评价[J]. 现代制造工程, 2017, 446(11): 22-28.

Zhang Yuxiang, Xuan Zhengnan, Sun Zhiwei, Zhang Yifen. Fuzzy comprehensive evaluation for gear box running status based on oil monitoring[J]. Modern Manufacturing Engineering, 2017, 446(11): 22-28.

参考文献

[1]何照荣,孙志伟,宣征南.基于铁谱定量分析的齿轮箱磨损分析[J].机械传动,2013(7):102-105.
[2] 高经纬,姜庆华,张培林,等.传动齿轮表面磨损过程中油液参数磨损特性分析[J].机械传动,2008(5):24-26.
[3] 朱兆聚,李方义,贾秀杰,等.基于油液监测技术的推土机变速箱故障诊断[J].润滑与密封,2014(7):83-87.
[4] 史训兵,熊志刚,李杨宗.基于在线油液磨粒检测的风电机组齿轮箱磨损状态监控[J].机械传动,2014(10):74-77.
[5] 何照荣,孙志伟,宣征南,等.重载齿轮系统油液分析数据灰色关联分析研究[J].机械传动,2014(6):19-22.
[6] 徐贞,樊瑜瑾,邢凡,等.基于铁谱分析技术的齿轮磨损研究[J].润滑与密封,2009(5):87-89.
[7] 高军,李来顺,赵海板,等.高速动车组齿轮油换油周期研究[J].润滑与密封,2015(2):89-92.
[8] ASHESH Tiwari,SURAJ Kumar Sharma.Wear debris analysis of internal combustion engine by ferrography technique[J].International Journal of Engineering Sciences,2014,3(7):788-793.
[9] ABOUEL-KASEN A,SALEH B,AHMED S M.Quantitative Analysis of Cavitation Erosion Particle Morphology in Dilute Emulsions[J].Journal of Tribology,2008,10(130):041603-1-041603-6.
[10] UPADHYAA R K.Microscopic technique to determine various wear modes of used engine oil[J].Journal of Microscopy and Ultrastructure,2013(1):111-114.
[11] ANDREW Hamilton,FRANCIS Quail.Detailed State of the Art Review for the Different Online/Inline Oil Analysis Techniques in Context of Wind Turbine Gearboxes[J].Journal of Tribology,2011,10(133):044001-1-044001-18.
[12] 肖运启,王昆朋,贺贯举,等.基于趋势预测的大型风电机组运行状态模糊综合评价[J].中国电机工程学报,2014,13(32):2132-2139.
[13] 杜栋,庞庆华,吴炎.现代综合评价方法与案例精选[M].北京:清华大学出版社2008:12-16.
[14] 牛东晓,李金超.电力能源综合评价理论[M].北京:中国电力出版社,2015:136-137.

基于油液监测技术的齿轮箱运行状态模糊综合评价

Fuzzy comprehensive evaluation for gear box running status based on oil monitoring

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

[1]	毕浩程、蒋章雷、吴国新、刘秀丽、栾忠权. 基于SSA-VMD和1.5维包络谱的齿轮箱磨损故障诊断的研究[J]. 现代制造工程, 2022, 500(5): 130-137.
[2]	杨柳，王建彬，徐慧敏，李庆安，疏达，江本赤. 基于正交实验的工业纯钛研磨工艺研究[J]. 现代制造工程, 2021, 491(8): 95-100.
[3]	李立成，华成丽，梁栋. 基于粒子群优化的机械传动齿轮箱非正常振动检测算法[J]. 现代制造工程, 2021, 491(8): 132-137.
[4]	谢锋云，董建坤，王二化，符羽，闫少石. 基于双隐含层RWPSO-BP神经网络的齿轮箱故障诊断研究[J]. 现代制造工程, 2021, 489(6): 155-160.
[5]	师超钰, 朱建辉, 孙鹏辉, 郭泫洋. 低浓度陶瓷CBN砂轮有效磨粒统计及磨削性能研究[J]. 现代制造工程, 2018, 459(12): 119-123.
[6]	朱海燕, 游学斌, 张翼, 邬平波, 曾京. 高速列车齿轮箱振动特性研究进展[J]. 现代制造工程, 2018, 458(11): 149-154.
[7]	张艳岗, 董家广, 苏铁熊, 张雪冬, 郭巨寿. 柴油机电控单体泵油道孔磨粒流加工数值模拟及挤磨压力优选[J]. 现代制造工程, 2017, 439(4): 91-96.
[8]	魏欢欢, 陆远. 基于AHP的汽车经销商信用模糊综合评价[J]. 现代制造工程, 2017, 438(3): 18-23.
[9]	王峰, 韩建霞. 重型车辆传动系统磨损状态的评价方法研究[J]. 现代制造工程, 2017, 438(3): 155-161.
[10]	侯昆峰, 李中凯. 面向绿色模块化的产品重设计方法[J]. 现代制造工程, 2017, 447(12): 139-145.
[11]	曲盼盼, 宣征南, 张铱鈖, 何照荣, 孙志伟. 趋势预测法在机械设备状态评价中的应用和展望[J]. 现代制造工程, 2017, 446(11): 157-161.
[12]	何玉辉, 周剑杰, 万荣桥, 唐楚, 唐进元. 超声振动平面磨削的表面残余应力数值模拟[J]. 现代制造工程, 2017, 445(10): 1-7.